headlight replacement

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
User avatar
notoriousgoz
Full Member
Posts: 56
Joined: Thu Sep 06, 2018 9:34 pm
Has thanked: 1 time

headlight replacement

Post by notoriousgoz » Sat Mar 09, 2019 6:55 pm

Hi all , this question has no doubt already been asked , what is the method for changing the headlight bulbs ? Obviously flipped up the lights are on ?TIA

Jon G 24V
Tech Rep
Posts: 142
Joined: Fri Sep 07, 2018 8:05 pm
Been thanked: 1 time

Re: headlight replacement

Post by Jon G 24V » Sat Mar 09, 2019 8:43 pm

Turn on the Headlights so they pop up. Go to the Fuse box and remove the 20 Amp Retra Fuse.
Turn off headlights and the lights will go out but will stay lifted.
Remove the Screws that hold the shrouds and remove the shroud.
Push the headlight back on its springs and move sideways to release the Headlight.
Remove the connector from the bulb to completely free the Headlight.
Take of the rubber boot and release the spring clip holding the Bulb in place.
Fit new bulb, do not touch the glass part of the bulb, look the spring clip back and follow the steps in reverse 😎😎
Switch on and check they light up. Once all back together replace the Fuse and the lights will drop again.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest