New suspension arms creaking?

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
KEG
Registered User
Posts: 79
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

New suspension arms creaking?

Post by KEG » Sat May 14, 2022 8:29 pm

Just had the two front suspension arms replaced. After about 20 miles driving there is a creaking sound from the drivers side especially when pulling away. Can new suspension arms creak when new, or would there be another issue? It’s basically ok when driving. It’s worse when putting the car into the garage for some reason. It’s a Probe 24v 1996.

jmx6
Full Member
Posts: 367
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: New suspension arms creaking?

Post by jmx6 » Sat May 14, 2022 8:39 pm

You are probably getting an echo when going into the garage so it sounds worse.

Check that all nuts and bolts have been correctly torqued as a start.

Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: New suspension arms creaking?

Post by Kit » Sat May 14, 2022 8:54 pm

Did you change the drop links :?:
Have you got rubber washers on both sides of the forward bushes.
Normally, there’s only one with new wishbones, & you have to re-use the old ones :idea:

Kit

Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: New suspension arms creaking?

Post by Kit » Sat May 14, 2022 8:55 pm

Or you have a broken spring :shock:

Kit

KEG
Registered User
Posts: 79
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: New suspension arms creaking?

Post by KEG » Sat May 14, 2022 9:24 pm

The garage I take the car to did the job so will go in and tell them about the issue.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 36 guests