For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
			
		
		
			- 
				
																			 fuerte
- Registered User
- Posts: 884
- Joined: Fri Sep 07, 2018 10:10 am
- Has thanked: 22 times
- Been thanked: 1 time
						
						
													
							
						
									
						Post
					
								by fuerte » Sat Apr 11, 2020 2:51 pm
			
			
			
			
			The mechanic vacumned my car even under rear seat.He said anytbing from inside the car was in the boot.
I found this.Any idea what it is.

			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 Micron
- Site Admin
- Posts: 3547
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 96 times
						
						
													
							
						
									
						Post
					
								by Micron » Sat Apr 11, 2020 4:01 pm
			
			
			
			
			It looks a bit like a "button" or "lever" that you would see on a door card, but it doesn't look 100% Ford Probe to me?
			
									
						
			Admin and Owner of this fine club 
 
Location : South Norfolk
 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 Mondeo55
- Registered User
- Posts: 477
- Joined: Mon Sep 10, 2018 4:48 pm
- Location: South Wales
- Has thanked: 24 times
- Been thanked: 4 times
						
						
													
							
						
									
						Post
					
								by Mondeo55 » Sat Apr 11, 2020 4:21 pm
			
			
			
			
			Looks like a wiper clip to me, the kind you get on the modern 'flat blades'. Could be an adaptor to make the flat blade design fit the hook fitting on the Probe too. Previous owner maybe?
			
									
						
			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 Kit
- Tech Rep
- Posts: 3642
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 75 times
- Been thanked: 119 times
						
						
													
							
						
									
						Post
					
								by Kit » Sat Apr 11, 2020 4:38 pm
			
			
			
			
			I don’t think it’s from a Probe  
 
 
What’s the marking on the top  
 
 
Kit
			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 jrh
- Full Member
- Posts: 1088
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 46 times
						
						
													
							
						
									
						Post
					
								by jrh » Sat Apr 11, 2020 5:35 pm
			
			
			
			
			Don't lose it !
That is the piece that fits into the very end of the trim on each side of the tailgate.
			
									
						
			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 fuerte
- Registered User
- Posts: 884
- Joined: Fri Sep 07, 2018 10:10 am
- Has thanked: 22 times
- Been thanked: 1 time
						
						
													
							
						
									
						Post
					
								by fuerte » Sat Apr 11, 2020 6:10 pm
			
			
			
			
			jrh wrote: ↑Sat Apr 11, 2020 5:35 pm
Don't lose it !
That is the piece that fits into the very end of the trim on each side of the tailgate.
 
Could you explain in more detail where you mean?He had to rewire  rear lights so that may explain it.He is very tidy but I had so many car parts in my car boot it may have got knocked off.
			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 fuerte
- Registered User
- Posts: 884
- Joined: Fri Sep 07, 2018 10:10 am
- Has thanked: 22 times
- Been thanked: 1 time
						
						
													
							
						
									
						Post
					
								by fuerte » Sat Apr 11, 2020 6:17 pm
			
			
			
			
			Wiper blade adapter also likely as I had two spare flatvblide wipers in my boot.As,I was so short one package split when I took parts out the boot so may have fell out.
I will investigate tommorow and look for namevon part too ehen I haveca better light.
Whatever I will hang on to it until I figure it out.
Found these too which were probably from previous owner.Just shows how well he valeted my car as I never do.
Cheers guys.I tell you he was so thorough and cheap too.The amount of work he did on it for next to nothing.He even welded the 2 rings either side of fexi hose front downpipe that were swinging away and having a  party.

			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 fuerte
- Registered User
- Posts: 884
- Joined: Fri Sep 07, 2018 10:10 am
- Has thanked: 22 times
- Been thanked: 1 time
						
						
													
							
						
									
						Post
					
								by fuerte » Sat Apr 11, 2020 6:24 pm
			
			
			
			
			Just had a think.Probably too big to be wiper adapter.About double the size.
Will try and get better piccies tommorow.
Also will try to describe it.
			
									
						
			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 Kit
- Tech Rep
- Posts: 3642
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 75 times
- Been thanked: 119 times
						
						
													
							
						
									
						Post
					
								by Kit » Sat Apr 11, 2020 6:53 pm
			
			
			
			
			I’ll try & find it in the the book of “Probe Parts”
Kit 

			
						 
		 
				
		
		 
	 
	
				
		
		
			- 
				
																			 Kit
- Tech Rep
- Posts: 3642
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 75 times
- Been thanked: 119 times
						
						
													
							
						
									
						Post
					
								by Kit » Sat Apr 11, 2020 7:03 pm
			
			
			
			
			Do you mean this part jrh  
 
 

Part No. 3
Kit
			
						 
		 
				
		
		 
	 
	
	
	
	
		Who is online
		Users browsing this forum: Google [Bot] and 57 guests