I found the instructions on how to by pass the Bosh immobiliser on my Ford Probe. One of the three methods described says "make up three wires and insert into the stated pin numbers". Is this done just into the plug with the immobiliser removed or with the plug then inserted back into the immobiliser. I have done it into the plug only but the car just turns over.
Thank you in advance
Geoff Shaw
Bosh Immobiliser- by pass Ford Probe 16V
-
geoff shaw
- Registered User
- Posts: 5
- Joined: Wed Jul 17, 2019 1:02 pm
-
geoff shaw
- Registered User
- Posts: 5
- Joined: Wed Jul 17, 2019 1:02 pm
Re: Bosh Immobiliser- by pass Ford Probe 16V
Thank you
so immobilser does not get refitted leaving the three wires inserted into the plug
so immobilser does not get refitted leaving the three wires inserted into the plug
-
Jon G 24V
- Tech Rep
- Posts: 662
- Joined: Fri Sep 07, 2018 8:05 pm
- Has thanked: 1 time
- Been thanked: 7 times
Re: Bosh Immobiliser- by pass Ford Probe 16V
If you link together the Wires according to the Write up then the Car should start and run.
Once your happy everything is working OK then cut the Wires in linked pairs (one pair at a time) and twist / solder together for a permanent fix.
The Immobiliser then goes in the bin along with the Button Key Fob
Once your happy everything is working OK then cut the Wires in linked pairs (one pair at a time) and twist / solder together for a permanent fix.
The Immobiliser then goes in the bin along with the Button Key Fob
-
geoff shaw
- Registered User
- Posts: 5
- Joined: Wed Jul 17, 2019 1:02 pm
Re: Bosh Immobiliser- by pass Ford Probe 16V
Hi
Car running fine now- no immobiliser or fob anymore. Thank you for giving me the confidence to do the surgery!!
Geoff Shaw
Car running fine now- no immobiliser or fob anymore. Thank you for giving me the confidence to do the surgery!!
Geoff Shaw
-
mojo98
- Tech Rep
- Posts: 2674
- Joined: Thu Sep 06, 2018 10:52 pm
- Location: Billingham
- Has thanked: 42 times
- Been thanked: 57 times
Re: Bosh Immobiliser- by pass Ford Probe 16V
That`s what this club is all about, helping other members to keep these cars on the road (well done to all who gave advise)geoff shaw wrote: ↑Mon Jul 22, 2019 9:17 amHi
Car running fine now- no immobiliser or fob anymore. Thank you for giving me the confidence to do the surgery!!
Geoff Shaw
Geoff have you considered becoming a full member (£10 per year) would cost you more if you took the car to a garage
-
geoff shaw
- Registered User
- Posts: 5
- Joined: Wed Jul 17, 2019 1:02 pm
Re: Bosh Immobiliser- by pass Ford Probe 16V
All
Thank you for your help on this. I attach the original notes from your forum with my experience added
may be useful for another probe owner
thanks again
Geoff Shaw
Thank you for your help on this. I attach the original notes from your forum with my experience added
may be useful for another probe owner
thanks again
Geoff Shaw
- Attachments
-
Ford Probe Immobiliser BOSCH by pass technique.pdf- (884.52 KiB) Downloaded 989 times
Re: Bosh Immobiliser- by pass Ford Probe 16V
Possibly the dumbest question on this forum -
Is there a specific wire I should use for linking the pairs? The guide mentions 10a standard wire, but google doesn't give a result, which means I have no idea what to do next.
Thanks as usual your all great people!
Is there a specific wire I should use for linking the pairs? The guide mentions 10a standard wire, but google doesn't give a result, which means I have no idea what to do next.
Thanks as usual your all great people!
Who is online
Users browsing this forum: Google [Bot] and 24 guests