wanted lower front wishbone bolt

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
el plates
Full Member
Posts: 220
Joined: Thu Sep 06, 2018 9:24 pm

wanted lower front wishbone bolt

Post by el plates » Sat Aug 10, 2019 11:18 pm

As the title suggests.............

Lower front wishbone bolts and nut... required

Had to cut mine off when replacing the wishbones,

so any one know the replacement bolt and nut size....

or a link to buying one......

Many thanks,
need it for the MOT

:D :D :D :D

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: wanted lower front wishbone bolt

Post by Kit » Sat Aug 10, 2019 11:58 pm

An M10 bolt 50mm long + use a Ny-loc nut

Got a OME one here if you need it

Kit

el plates
Full Member
Posts: 220
Joined: Thu Sep 06, 2018 9:24 pm

Re: wanted lower front wishbone bolt

Post by el plates » Sun Aug 11, 2019 9:24 am

Thanks Duncan,

I am sure i have one in my spares somewhere also......but just needed the info.

i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol

many thanks for the offer.

Thanks for the info.

See you soon.

:D :D :D :D

el plates
Full Member
Posts: 220
Joined: Thu Sep 06, 2018 9:24 pm

Re: wanted lower front wishbone bolt

Post by el plates » Sun Aug 11, 2019 9:06 pm

Kit wrote:
Sat Aug 10, 2019 11:58 pm
An M10 bolt 50mm long + use a Ny-loc nut

Got a OME one here if you need it

Kit

that sounds like the lower ball joint to the hub.....

i was after the long one at the front of the wishbone

nut is held by a welded cage,
and thats where the dirt gets stuck and it rusts it all up......

bolt feeds from the front.....

looks like about 100mm long from under the bolt head to the end.
Maybe an M12???

please can anyone clarify.

thank you

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: wanted lower front wishbone bolt

Post by Kit » Mon Aug 12, 2019 6:58 am

It M12 :) (because you use a 17mm socket on it)

Kit

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: wanted lower front wishbone bolt

Post by Kit » Mon Aug 12, 2019 9:36 am

If you can’t find a bolt, you could use a length of M12 studding, & use two nuts on the studding to make the length of bolt you need.

Kit

Micron
Site Admin
Posts: 3161
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: wanted lower front wishbone bolt

Post by Micron » Mon Aug 12, 2019 9:53 am

Wayne,

Do you need the nut as well?

as a last resort, could you remove the other one and use it as a guide, then go to a local ironmongers to get a replacement bolt etc?
Admin and Owner of this fine club 😎

Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests