Immobiliser issues

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Alfie
Registered User
Posts: 10
Joined: Sun Apr 28, 2019 8:49 pm

Immobiliser issues

Post by Alfie » Mon May 13, 2019 10:49 pm

Hiya everyone is there away to get round the immobiliser don’t know if there’s a sequence to activate and deactivate it my car was fine yesterday but today nothing and even the AA couldn’t get it started any ideas guys cheers Alfie

Micron
Site Admin
Posts: 3159
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Immobiliser issues

Post by Micron » Mon May 13, 2019 10:58 pm

Alfie,
Does yours have a Bosch immobiliser, as I thought it was a later model, that has the chipped key?
You may find that it could be the CPS plug, that you just need to pull apart, give it a bit of a clean ( blown in it) and put it back together, or it could be the distributor
Admin and Owner of this fine club 😎

ICKLE
Site Admin
Posts: 508
Joined: Thu Sep 06, 2018 8:42 pm

Re: Immobiliser issues

Post by ICKLE » Mon May 13, 2019 11:00 pm

Hey Alfie are you getting a spark,,,,late 24v so you should have a chipped key for the moby which normally shouldn't give you any problems iirc ,,,,more than likely if your not getting a spark it will be the dizzy gone ,,,,,did you try disconnecting and re connecting the cps plug (grey plug top left hand side of the front rocker cover)!!!!!

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Immobiliser issues

Post by mojo98 » Tue May 14, 2019 7:13 am

As others have said could be the Crankcase sensor connection (its happens now and again on m late 24v`) even last week on my Gold 24v,
take the connection apart and clean it then put it back together
Image
Last edited by mojo98 on Tue May 14, 2019 3:25 pm, edited 1 time in total.

Alfie
Registered User
Posts: 10
Joined: Sun Apr 28, 2019 8:49 pm

Re: Immobiliser issues

Post by Alfie » Tue May 14, 2019 1:42 pm

Hiya everyone thanks for your replies and it’s the distributor and I pick up a new one tomorrow cheers guys 👍🏻

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Immobiliser issues

Post by mojo98 » Tue May 14, 2019 3:35 pm

Alfie wrote:
Tue May 14, 2019 1:42 pm
Hiya everyone thanks for your replies and it’s the distributor and I pick up a new one tomorrow cheers guys 👍🏻
let us know how you get on :D

Alfie
Registered User
Posts: 10
Joined: Sun Apr 28, 2019 8:49 pm

Re: Immobiliser issues

Post by Alfie » Tue May 14, 2019 6:05 pm

Hiya it turns out it was the cranking sensor gave it a good blow and reconnect it and she fired up first turn 😊👍🏻

Jon G 24V
Tech Rep
Posts: 658
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 6 times

Re: Immobiliser issues

Post by Jon G 24V » Tue May 14, 2019 6:27 pm

Alfie wrote:
Tue May 14, 2019 6:05 pm
Hiya it turns out it was the cranking sensor gave it a good blow and reconnect it and she fired up first turn 😊👍🏻
Good news mate, simple (Cheap) fixes are always the best 😎😎

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 46 guests