Probe aerial problem

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Probe aerial problem

Post by KEG » Wed Nov 24, 2021 6:21 pm

I have a Probe 24V 1996. When I turn on the CD player/radio the aerial normally comes up at the back. It is now only coming up a short distance and then gets stuck but you can hear the motor going still. I have to pull the aerial up manually. When I turn the CD player/radio off, you can hear the motor but it does not go down. If I push it down it gets to the bottom and it’s hard to push it right down. When I do eventually push it down the aerial goes in automatically but you have to push it hard. I’ve used WD 40 on the aerial but it has not helped. Anyone got any ideas?

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Probe aerial problem

Post by Kit » Wed Nov 24, 2021 6:34 pm

The nylon teeth on the drive are broken
You need a new aerial, or try to repair the one you have got

Kit

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Probe aerial problem

Post by KEG » Wed Nov 24, 2021 6:40 pm

Thanks

Are replacement aerials freely available?

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Probe aerial problem

Post by Kit » Wed Nov 24, 2021 6:46 pm

KEG wrote:
Wed Nov 24, 2021 6:40 pm
Thanks

Are replacement aerials freely available?
OME ones no, You might be lucky to get on from the State
Aftermarket, yes

Kit

cpt black
Tech Rep
Posts: 2663
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 10 times
Been thanked: 82 times

Re: Probe aerial problem

Post by cpt black » Wed Nov 24, 2021 7:35 pm

I have 2 OEM here not cheap £130 each posted or i have second hand ones here £54 tested posted
working
Kev

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Probe aerial problem

Post by KEG » Wed Nov 24, 2021 8:06 pm

Definitely interested in the second hand one. Do you access the aerial through the boot?

Anyway let me know about how to get it and payment details etc.

Thanks

cpt black
Tech Rep
Posts: 2663
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 10 times
Been thanked: 82 times

Re: Probe aerial problem

Post by cpt black » Wed Nov 24, 2021 8:31 pm

Yes access through boot lay rear seat done by antenna,remove parcel shelf,remove rear boot panel/remove side
panel by antenna and your there,10 mm nut holds it in place and plugs,TAKE the top outer antenna cap off your see 2
points on it to use circlip pliers or use a Stillsons but wrap them to save the top ;)

Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 38 guests