Bonnet prop clip

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Bonnet prop clip

Post by fuerte » Fri Jul 23, 2021 2:29 pm

My clip that holds the base of the bonnet prop has gone as they do so it is no longer held in at the base.
I have had a make shift repair done before but I cannot quite remember how.
I think it involved a split pin?
Can someone suggest what to do please?
If there are unicorns and anyone has a proper clip I will happily pay for it.
Cheers in advance
I hope everyone is well. Really busy at the moment. Sunfly I will speak in a couple of weeks
Top
mojo98
Tech Rep
Posts: 2627
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 41 times
Been thanked: 55 times

Re: Bonnet prop clip

Post by mojo98 » Fri Jul 23, 2021 2:51 pm

Hi Elaine, will check my spares for you (but can't promise)
plus it will have to wait until return from a weeks holiday in Penzance
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: Bonnet prop clip

Post by fuerte » Fri Jul 23, 2021 3:17 pm

mojo98 wrote: ↑
Fri Jul 23, 2021 2:51 pm
 Hi Elaine, will check my spares for you (but can't promise)
plus it will have to wait until return from a weeks holiday in Penzance
That would make my day. It is my birthday soon so that would be a perfect present. I know they are like rocking horse poo.
Have I great time in Penzance. We used to stay there overnight in the way to the Scilly's.
In the meantime anyone know a temp fix?
I need to check my oil tommorow but I think I can hold it up or put something to rest it on or gaffer tape. It is hot now so I will sleep on it and figure something out
Have a great weekend everyone and stay safe
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: Bonnet prop clip

Post by fuerte » Fri Jul 23, 2021 3:18 pm

The car is hot not me😂😂
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: Bonnet prop clip

Post by fuerte » Sat Aug 14, 2021 11:27 am

mojo98 wrote: ↑
Fri Jul 23, 2021 2:51 pm
 Hi Elaine, will check my spares for you (but can't promise)
plus it will have to wait until return from a weeks holiday in Penzance
Hi
Did you have chance to look for that clip.I hope you had a great holiday. You may still be there?
Some peope are breaking so I don,t know whether to ask them.I would probably have the whole unit if I can't get a clip as will be less likely to break.
Take Care eveyone.
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: Bonnet prop clip

Post by Kit » Tue Aug 17, 2021 10:14 pm

What about these :?:
https://www.ebay.co.uk/itm/192748613197 ... Sws2RcB-MM

Kit
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: Bonnet prop clip

Post by fuerte » Wed Aug 18, 2021 12:45 am

Kit wrote: ↑
Tue Aug 17, 2021 10:14 pm
 What about these :?:
https://www.ebay.co.uk/itm/192748613197 ... Sws2RcB-MM

Kit
Cheers Kit.
Much appreciated. I hope you are well.
Top
fuerte
Registered User
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: Bonnet prop clip

Post by fuerte » Wed Aug 18, 2021 10:19 am

fuerte wrote: ↑
Wed Aug 18, 2021 12:45 am
Kit wrote: ↑
Tue Aug 17, 2021 10:14 pm
 What about these :?:
https://www.ebay.co.uk/itm/192748613197 ... Sws2RcB-MM

Kit
Cheers Kit.
Much appreciated. I hope you are well.
My reading glasses are at the opticians but I don't think that is what I need . It is the clip that holds the prop at it's base that is swivels on not the clip you pop it into before shutting the bonnet??
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: Bonnet prop clip

Post by Kit » Wed Aug 18, 2021 12:26 pm

Most of these are now broken.
They get brittle with age
:idea: May be some one with a ‘3D’ printer & the software, could make them :idea:
I think there would be a limited market out there for them

Kit
Top
Micron
Site Admin
Posts: 3332
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: Bonnet prop clip

Post by Micron » Wed Aug 18, 2021 12:54 pm

Kit wrote: ↑
Wed Aug 18, 2021 12:26 pm
 Most of these are now broken.
They get brittle with age
:idea: May be some one with a ‘3D’ printer & the software, could make them :idea:
I think there would be a limited market out there for them

Kit
Maybe it's something the club could look at having made?
Admin and Owner of this fine club 😎
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 14 guests