Speedo drive removal

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Micron
Site Admin
Posts: 3159
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Speedo drive removal

Post by Micron » Sat Nov 21, 2020 2:10 pm

Once I have taken the bolt out of the Speedo drive, will the sensor move side to side to help free it if it's persuaded a bit?
Admin and Owner of this fine club 😎

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Speedo drive removal

Post by mojo98 » Sat Nov 21, 2020 3:02 pm

No it won't move side to side because it sat on a little stud, once it's above the stud then it will move side to side

Here is a picture of one,


Image

Micron
Site Admin
Posts: 3159
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Speedo drive removal

Post by Micron » Sat Nov 21, 2020 3:52 pm

How do I get it out then?
Admin and Owner of this fine club 😎

sockett 1962 ][
Full Member
Posts: 112
Joined: Fri Sep 07, 2018 8:43 pm
Been thanked: 3 times

Re: Speedo drive removal

Post by sockett 1962 ][ » Sat Nov 21, 2020 4:38 pm

this is something i need to do aswell had a look and its in a awful position for now i have a gps speedo but any tips would be good

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Speedo drive removal

Post by mojo98 » Sat Nov 21, 2020 6:13 pm

Well I've never (touch wood) changed one.
But have seen one removed but that was with a big hammer, and guess what :?:

It snapped,

My suggestion would be remove the fixing both then loads and loads of wd40, then leave it, letting it soak in then with a very thin bladed screw driver, try and ease it up

Ask Aaron how he changed his, he may be able to put a view on it,
There again if it not working does it matter if you damage it while removing it

Micron
Site Admin
Posts: 3159
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Speedo drive removal

Post by Micron » Sat Nov 21, 2020 7:28 pm

I'm trying to save the one from the breaker, so don't to break it if possible 🤔👍
Admin and Owner of this fine club 😎

Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests