For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Incognito
- Full Member
- Posts: 2291
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Sat Oct 31, 2020 4:36 pm
After my good MOT news on Thursday, I've struck up today, and have no brakes
New brake calipers were fitted at the garage and I've driven the 10 miles back home no problem.
Got in today, started , put in reverse, and brake pedal goes straight to the floor.
I've visually inspected for any fluid leaks, and brake reservoir is at the correct fluid level. When the engine is running there is no pedal resistance at all, engine off and there is some resistance. Is this a problem relating to the recent work or a coincidence

-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sat Oct 31, 2020 4:42 pm
Sounds like the seals in the master cylinder are weak.
Kit
-
Incognito
- Full Member
- Posts: 2291
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Sat Oct 31, 2020 4:52 pm
Kit wrote: ↑Sat Oct 31, 2020 4:42 pm
Sounds like the seals in the master cylinder are weak.
Kit
Right ok cheers Duncan. I don't have one of those, do you happen to have one in stock that I could purchase please

-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sat Oct 31, 2020 5:14 pm
Yep ,
Drop us your address,& I put it in the post
Kit
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sat Oct 31, 2020 5:24 pm
This is the brake master cylinder
I would recommend replacing the link hose to the clutch master cylinder, with new hose & clips. Remember, the clutch will need bleeding as well
I’ll clean it up before I send it.
Kit
-
Incognito
- Full Member
- Posts: 2291
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Sat Oct 31, 2020 5:28 pm
Fantastic Duncan , that is much appreciated mate , let me know costs and I'll send it over to you and then I'll get it towed over to the garage.
-
jrh
- Full Member
- Posts: 1054
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 44 times
Post
by jrh » Sat Oct 31, 2020 6:58 pm
A lifetime in 'maintenance' convinced me of the truth of 'the inverted ' bathtub curve' and , wherever possible, 'if it ain't broke, don't fix it' theory.
Essentially , if things go wrong it will be directly after (faulty) 'maintenance' and at 'end of useful life'.
So, coincidence that your brakes failed after maintenance, following 'years' of faultless performance ?
Nope.
-
david_toft
- Registered User
- Posts: 84
- Joined: Tue Sep 11, 2018 5:00 pm
- Been thanked: 1 time
Post
by david_toft » Sun Nov 01, 2020 9:47 am
I think I have an explanation for this master cylinder failure.
When the calipers were bled the full stroke of the pedal was used, which never happens in normal driving. The rubbers in the master cylinder moved over a part of the bore that hasn't been touched in a long time and has some rusting (brake fluid absorbs water), this rust digs grooves in the rubbers and they no longer seal.
I try to use no more than half the pedal travel when bleeding brakes.
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Sun Nov 01, 2020 1:12 pm
Thinking about what David said,
Would it be a good

to the replace the seals within the master cylinder, before swapping them .
That way you’re know that they ‘good’
Repair kit’s are about £10 from Rockauto’s + shipping & tax
I could get you a set, & fit them. Before I post to you, but that could take a few weeks.
Kit
-
Incognito
- Full Member
- Posts: 2291
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Sun Nov 01, 2020 2:49 pm
Kit wrote: ↑Sun Nov 01, 2020 1:12 pm
Thinking about what David said,
Would it be a good

to the replace the seals within the master cylinder, before swapping them .
That way you’re know that they ‘good’
Repair kit’s are about £10 from Rockauto’s + shipping & tax
I could get you a set, & fit them. Before I post to you, but that could take a few weeks.
Kit
That would be fantastic and very much appreciated Duncan , not a problem on timescale at all. Yes, if you don't mind ordering as you know what's what and let me know how much I owe you and ill get it sent straight over. Thank you

Who is online
Users browsing this forum: No registered users and 36 guests