How do you test boot struts ???

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

How do you test boot struts ???

Post by Kit » Mon Sep 21, 2020 11:14 am

Over the years I’ve amassed a big collection of boot struts :o
Image
The yellow labels are OME’s KB76
The green labels are OME’s KB79
The blue labels aftermarket

You might note the OME’s have the hatch fitting on the silver push rod, the aftermarket ones are the other way round :?

So, a manual ‘push test’, highlighted just one weak strut :( , this was discarded. Which surprising.

Now going to play ‘swap the struts’, to see if any are useable ;)

I’ll Keep you posted, with 8 sets to try, it’ Going to be a little while

Kit

jrh
Full Member
Posts: 958
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: How do you test boot struts ???

Post by jrh » Mon Sep 21, 2020 12:52 pm

Push down on bathroom scales , should be at least 20kg to be any good.
Is that how you test them ?

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: How do you test boot struts ???

Post by Kit » Mon Sep 21, 2020 3:01 pm

After pairing the struts up, each pair was tried on the the ‘test bed’, which was the “Probe trailer” ex VIN Ser.No. R009314.
The struts on here have failed, since I took ownership of it more than a year, used only for storage, so little use on the struts.
Image
Found all of them held the tailgate up, :o
Which surprise me, on the manual push, all had strong resistance. This was confirmed as the two removed from the trailer, were soft.
The only thing missing from the tailgate on the ‘test bed’ is the rear wiper motor & a bit of trim, but I don’t think this would have made much difference.
So, I now have 8 sets of usable struts ( for tailgate without a spoiler, some of which are for Sale

Kit

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: How do you test boot struts ???

Post by Kit » Mon Sep 21, 2020 3:17 pm

Still not convinced, I bolted a wiper motor the the u/side off the tailgate
Image
The set of struts, left on still held the tailgate up, so I’ll conclude the the other sets will be OK.
The Blue labelled aftermarket one, were best, with a lot more resistance

Now to try the jrh bath room scales test

Kit

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: How do you test boot struts ???

Post by Kit » Mon Sep 21, 2020 3:37 pm

jrh wrote:
Mon Sep 21, 2020 12:52 pm
Push down on bathroom scales , should be at least 20kg to be any good.
Is that how you test them ?
John, 👍 a good way of testing the struts,
But I found the figure should be a lot higher
The failed struts made 20kgs :?
A sample pair of OME struts (that we’re good on the test bed), reached over 40kgs,
Blue labelled aftermarket ones made 50kgs.

On
The whole an interesting afternoon

Kit

cpt black
Tech Rep
Posts: 2663
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 10 times
Been thanked: 82 times

Re: How do you test boot struts ???

Post by cpt black » Mon Sep 21, 2020 3:49 pm

Blue ones should be strong arm ones which are spoiler rated mate

jrh
Full Member
Posts: 958
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: How do you test boot struts ???

Post by jrh » Mon Sep 21, 2020 4:16 pm

Well done, the 20kg were my old ones which , just about, lifted a clean non spoiler tailgate.

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: How do you test boot struts ???

Post by jmx6 » Mon Sep 21, 2020 6:33 pm

Some properly done testing there - good work

Elland 57
Full Member
Posts: 137
Joined: Fri Sep 07, 2018 8:51 pm
Been thanked: 1 time

Re: How do you test boot struts ???

Post by Elland 57 » Mon Sep 21, 2020 7:25 pm

Thank goodness he is going back to work Tuesday. :lol: :lol:

Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests