Drive shaft end stuck in the gear box

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Sun Jul 15, 2018 12:58 pm

Thanks

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Tue Jul 17, 2018 8:55 pm

Still no luck on getting it out 😢😢😢

jrh
UKPOC Full Member
Posts: 451
Joined: Wed May 13, 2009 9:37 pm
Drives: 94probe

Re: Drive shaft end stuck in the gear box

Post by jrh » Wed Jul 18, 2018 8:18 am

If you pm me, I will send you a sectional view through the gearbox. At least you will have an idea of what you can/can't do
with regard to breaking anything in order to get the shaft out.
Looks really easy !

fuerte
UKPOC Full Member
Posts: 2044
Joined: Sun Feb 12, 2012 1:10 pm
Drives: probe24v1996
Location: Birmingham

Re: Drive shaft end stuck in the gear box

Post by fuerte » Wed Jul 18, 2018 8:44 am

Not read all the posts but just you tubed it.There are loads but I only watched one.He suggests 2 man job,one pushes down from top with wood and he hits from bottom with piece of wood as buffer,he also suggests turning shaft to certain position some notch showing or something.As far As I could see applying pressure above was key.
I know I am no tech but as someone suggested sending you photos I had a quick look and you tubeis useful.just a thought.
Ps I am aware it was not a probe so you may not be able to get to it from the top as without looking may not be space.

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Thu Jul 19, 2018 8:09 pm

Come on lads it’s sorted now MOT ready after 6 long years all I need to do is book it in and then I can not wait to go to some meet ups and get to meet some of you lot. Thanks for all the help

fuerte
UKPOC Full Member
Posts: 2044
Joined: Sun Feb 12, 2012 1:10 pm
Drives: probe24v1996
Location: Birmingham

Re: Drive shaft end stuck in the gear box

Post by fuerte » Thu Jul 19, 2018 9:17 pm

Wicked job done.look forward to hearing how much you enjoyed your next meet or just. a day enjoying your probe.glad sorted.enjoy

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Thu Jul 26, 2018 6:30 pm

Mot time tomorrow morning hoping for good news

fuerte
UKPOC Full Member
Posts: 2044
Joined: Sun Feb 12, 2012 1:10 pm
Drives: probe24v1996
Location: Birmingham

Re: Drive shaft end stuck in the gear box

Post by fuerte » Thu Jul 26, 2018 6:38 pm

Good luck.I think you deserve a pass.please let us know.personally I enjoy others good news rather than my own.Not sure on the maths but less than 24hours you should have a result.

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Fri Jul 27, 2018 1:25 pm

We’re the best place to get a little battery from for the probe

fuerte
UKPOC Full Member
Posts: 2044
Joined: Sun Feb 12, 2012 1:10 pm
Drives: probe24v1996
Location: Birmingham

Re: Drive shaft end stuck in the gear box

Post by fuerte » Fri Jul 27, 2018 2:02 pm

The correct battery for a 24v that fits properly is a Tayna AMO58L.Mojo uses them.I am pretty sure I got direct from Tayna.If you cannot find I will look for my invoice to check.I may have got it from the battery place Mojo recommended.

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Sun Jul 29, 2018 7:14 pm

Thanks

User avatar
mojo98
NE Regional Rep
Posts: 7608
Joined: Sun Oct 26, 2008 4:34 pm
Drives: 1997 24V + 1998 24V
Location: North East, head of the Ford probe

Re: Drive shaft end stuck in the gear box

Post by mojo98 » Sun Jul 29, 2018 8:24 pm

yes AM058L is what you need and Tayna have them
Image

CAR OF THE SHOW 2102 SBM JOINT 2ND 2014 Gold, 2ND 2015 24v Gold
BEST STD 16V 2011, 2012, 2013 & 2014 SBM, 2015 Rio
BEST STD 24V 2009,2010,2011,2012,2013,2014, 2ND 2015
BEST INTERIOR 2009 24V Gold probe + 2012 16V (SBM) & 2013 16V SBM
3RD PLACE SHOW & SHINE 2012, 2nd 16V 2013, 3rd 2013 24V,WINNER 2014, WINNER 2015 24V, + 2ND Rio
THE PAUL S MEMORIAL AWARD 2011

User avatar
Jon G 24V
Head Tech Guru
Posts: 5973
Joined: Sat Jul 02, 2005 12:32 am
Drives: 95 'N'Reg 24V
Location: Leicester

Re: Drive shaft end stuck in the gear box

Post by Jon G 24V » Sun Jul 29, 2018 8:39 pm

mojo98 wrote:
Sun Jul 29, 2018 8:24 pm
yes AM058L is what you need and Tayna have them
Got one this week for Kaz, fits a treat 😎😎
Image

'Rosie'

1995 'N'Reg - 2.5LTR 24V-Rio Red Barn Find - UKPOC No69

User avatar
BOPPER
UKPOC Full Member
Posts: 3204
Joined: Mon Nov 27, 2006 7:49 pm
Drives: Old blokes type car
Location: High Peak

Re: Drive shaft end stuck in the gear box

Post by BOPPER » Mon Jul 30, 2018 3:17 pm

Well done on the result Lee. =D> =D> =D>
Drove Black`95 16v, N plate. For Nine great years.
Fest 2016. First place personalised 16v.
Fest 2014. First place personalised 16v.
Fest 2012. Second place personalised 16v.
Fest 2010. Second place personalised 16v.
Fest 2009. Second place standard 16v.

leeclarkson
UKPOC Full Member
Posts: 59
Joined: Sun May 15, 2016 11:44 am
Drives: ford probe 2.4v
Location: Kiveton park

Re: Drive shaft end stuck in the gear box

Post by leeclarkson » Fri Aug 03, 2018 9:16 pm

That’s it people it’s now has a mot and is ready for the road except the cooling fans but I know what the problem is and is getting fixed next week

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests