Abs code reading reports all 4 sensors!?
Posted: Tue Jun 11, 2019 12:27 am
Hey,
I'm having problems pulling codes from the diagnostics box. I was using a paperclip to connect GND and TBS, then turning the ignition 2 turns. After trying it maybe 20 times the error codes were only shown twice. (They would go through the codes once, then the abs light would stay solid on.)
The codes were: 11, 12, 13, 14, then either 51 or 61.
I've checked and cleaned all 4 sensors (all have good resistance) so I'm guessing it's somewhere else. The cars had the abs light on for the past 6 years, and there's slight damage to the rear panels where I'm guessing they've checked the sensors too. So it's probably something more serious. Any help would be greatly appreciated.
Thanks,
I'm having problems pulling codes from the diagnostics box. I was using a paperclip to connect GND and TBS, then turning the ignition 2 turns. After trying it maybe 20 times the error codes were only shown twice. (They would go through the codes once, then the abs light would stay solid on.)
The codes were: 11, 12, 13, 14, then either 51 or 61.
I've checked and cleaned all 4 sensors (all have good resistance) so I'm guessing it's somewhere else. The cars had the abs light on for the past 6 years, and there's slight damage to the rear panels where I'm guessing they've checked the sensors too. So it's probably something more serious. Any help would be greatly appreciated.
Thanks,