Odd failures - fixed (partially)

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
User avatar
Scooby
Registered User
Posts: 481
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 3 times
Been thanked: 3 times

Re: Odd failures

Post by Scooby » Wed Apr 24, 2019 1:16 pm

Jon G 24V wrote:
Thu Apr 18, 2019 12:38 pm
Been looking at the Wiring Diagrams and have a Path for you to follow.

1) Check 60A Fuse in Battery Junction Box (IG KEY)
2) Power Feed to Ignition Switch should be Black / Blue Wire (Heavy Duty) Check at Connector under Dash and then again at Ignition Switch to ensure
you have 12V supply to Switch
3) Power from the Ignition Switch is on a Black and Pink Wire (Heavy Duty). Again check at Switch and then after Connector under Dash.
4) Turn Key to Position 2, dont start Car and try the Sunroof. This will tell you again if ACC has power.
5) Check METER Fuse in Footwell as the Clocks are supplied by this.
6) Mirrors run of the RADIO Fuse and the Stereo runs via METER, RADIO and ROOM Fuses so worth double checking these.

After this i'm lost :lol: :lol:
Numbers 1 and 6 (except METER) checked yesterday but happy to follow the trail Jon. Thank you.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

User avatar
Scooby
Registered User
Posts: 481
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 3 times
Been thanked: 3 times

Re: Odd failures

Post by Scooby » Thu Apr 25, 2019 9:15 am

While I was out last night I thought I'd try No 4 on the list.

Sunroof doesn't work with key in ACC position, but windows do.
I'll do everything in order when I get some time later though.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

cpt black
Tech Rep
Posts: 2666
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 82 times

Re: Odd failures

Post by cpt black » Thu Apr 25, 2019 10:21 am

Have you pulled the CPU and took the cover off and
gave it a visual

User avatar
Scooby
Registered User
Posts: 481
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 3 times
Been thanked: 3 times

Re: Odd failures

Post by Scooby » Fri Apr 26, 2019 9:44 am

cpt black wrote:
Thu Apr 25, 2019 10:21 am
Have you pulled the CPU and took the cover off and
gave it a visual
No, not yet. I have managed to find a spare unit so might just throw it in and see what happens, but I didn't think the CPU had anything to do with ACC power. (Happy, as always, to be corrected.)
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

User avatar
Scooby
Registered User
Posts: 481
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 3 times
Been thanked: 3 times

Re: Odd failures - fixed (partially)

Post by Scooby » Thu May 02, 2019 2:40 pm

Fixed, but not completely.

I found a spare CPU but it didn't make any difference, and I had a spare fuse box as well, so I thought I'd throw it in and see what happened.

Hey presto, everything bar the rev counter now works again.

Anyone any idea what could be up with the rev counter?
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

Jon G 24V
Tech Rep
Posts: 658
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 6 times

Re: Odd failures - fixed (partially)

Post by Jon G 24V » Thu May 02, 2019 3:23 pm

Last bad Rev Counter i had i cured by changing the Electronics unit for it on the back of the Clock.
Mine was intermittent and would show revs when it felt like it.

cpt black
Tech Rep
Posts: 2666
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 82 times

Re: Odd failures - fixed (partially)

Post by cpt black » Thu May 02, 2019 5:55 pm

Cpu to Fuse box your on the write thread Kev hopefully your
now have it sorted soon ;)

User avatar
Scooby
Registered User
Posts: 481
Joined: Fri Sep 21, 2018 11:49 am
Has thanked: 3 times
Been thanked: 3 times

Re: Odd failures - fixed (partially)

Post by Scooby » Thu May 02, 2019 10:20 pm

Jon G 24V wrote:
Thu May 02, 2019 3:23 pm
Last bad Rev Counter i had i cured by changing the Electronics unit for it on the back of the Clock.
Mine was intermittent and would show revs when it felt like it.
I'd already replaced that part. I guess it could have been the fuse box again and I replaced a working set with a dodgy set, but who knows? :roll:
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests