Dizzy failure

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
fanman
Full Member
Posts: 129
Joined: Fri Sep 14, 2018 10:05 am
Has thanked: 1 time
Been thanked: 6 times

Dizzy failure

Post by fanman » Sat Mar 23, 2019 6:18 pm

Does anyone know which internal part usually fails when our dizzies go 'bad' :?: (early 16v)
I am talking about the known issue related to the imobilizer / overheating etc.

I have just been testing the coils on a couple of 'bad' dizzies I have kept and the readings all seem OK so I am intrigued which part has actually gone bad :?: :?:

jrh
Full Member
Posts: 959
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: Dizzy failure

Post by jrh » Sun Mar 24, 2019 8:26 am

I did buy the 'big transistor' on the coil pack separately , intending to replace the same item on a known faulty distributor.
Just to see if it works again with a new 'big transistor'.
Events overtook me, so I will never know.
PM me your details and you can have it. Worth a try, then we'll all know.
It is the ONLY item that is visible, all the rest are encapsulated and impossible to identify.

jrh
Full Member
Posts: 959
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: Dizzy failure

Post by jrh » Sun Mar 24, 2019 8:28 am

Arggh, should have read the 16v bit, sorry , probably different in your case.

fanman
Full Member
Posts: 129
Joined: Fri Sep 14, 2018 10:05 am
Has thanked: 1 time
Been thanked: 6 times

Re: Dizzy failure

Post by fanman » Sun Mar 24, 2019 11:17 am

No worries - thank you for the kind offer though :-)
Btw - where did you source the new transistor and how can I tell which one to buy for the 16V - any ideas?
Cheers :-)

jrh
Full Member
Posts: 959
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: Dizzy failure

Post by jrh » Sun Mar 24, 2019 7:09 pm

The 'big transistor' on the 24V coil pack has its code no. etched on it.
I bought the same one for £9.95 , via ebay /China. Two week delay but arrived ok.
I imagine the 16V will have a similar item, maybe even the same one ?
If you find the number , let me know and I will check what I have here.

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Dizzy failure

Post by Kit » Sun Mar 24, 2019 7:29 pm

Give me a couple of weeks, I'll test & sort out a Dizzy for you.

Early or late (S1 or S3) ??

Kit

Sunfly
Full Member
Posts: 994
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 22 times

Re: Dizzy failure

Post by Sunfly » Sun Mar 24, 2019 10:48 pm

I had 7 failures over the 285k milage of M939FDF which was a 16v with the Bosch immobiliser and I used to buy a kit through Mazda of what looked like the hall effect sensor and a built in coil. About £60 from memory. The last failure I had, I was told the kit was no longer available but I'm not sure that info was trustworthy. What the situation is now, I dont know but I've seen coils for sale on ebay that look suspiciously like it.

fanman
Full Member
Posts: 129
Joined: Fri Sep 14, 2018 10:05 am
Has thanked: 1 time
Been thanked: 6 times

Re: Dizzy failure

Post by fanman » Wed Mar 27, 2019 11:57 pm

Sorry guys for the late reply ....for some reason I am not getting email notifications when anyone responds to my posts... :?:


Thanks JRH - I will get back to you if I manage to get a number 8-)
Thanks also KIT but I don't actually need a dizzy - I was just thinking of trying to sort out some of the old failed ones I have lying around . Like I said, the actual coils all seem to be OK so I wanted to know what part actually fails. JRH is saying possibly the transistor, but I have also read somewhere that the 'igniter' can fail too - not sure if this is replaceable.

fanman
Full Member
Posts: 129
Joined: Fri Sep 14, 2018 10:05 am
Has thanked: 1 time
Been thanked: 6 times

Re: Dizzy failure

Post by fanman » Thu Mar 28, 2019 12:00 am

Sunfly wrote:
Sun Mar 24, 2019 10:48 pm
I had 7 failures over the 285k milage of M939FDF which was a 16v with the Bosch immobiliser and I used to buy a kit through Mazda of what looked like the hall effect sensor and a built in coil. About £60 from memory. The last failure I had, I was told the kit was no longer available but I'm not sure that info was trustworthy. What the situation is now, I dont know but I've seen coils for sale on ebay that look suspiciously like it.
Was that with the immobiliser bypassed :o ??

Sunfly
Full Member
Posts: 994
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 22 times

Re: Dizzy failure

Post by Sunfly » Sat Mar 30, 2019 12:50 pm

No. I never modified the car in any way. It went in 2008 and I wasnt a member of UKPOC in those days so didnt know about the immobiliser bypass.

Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests