headlight replacement
-
notoriousgoz
- Registered User
- Posts: 157
- Joined: Thu Sep 06, 2018 9:34 pm
- Has thanked: 29 times
- Been thanked: 1 time
headlight replacement
Hi all , this question has no doubt already been asked , what is the method for changing the headlight bulbs ? Obviously flipped up the lights are on ?TIA
-
Jon G 24V
- Tech Rep
- Posts: 659
- Joined: Fri Sep 07, 2018 8:05 pm
- Has thanked: 1 time
- Been thanked: 7 times
Re: headlight replacement
Turn on the Headlights so they pop up. Go to the Fuse box and remove the 20 Amp Retra Fuse.
Turn off headlights and the lights will go out but will stay lifted.
Remove the Screws that hold the shrouds and remove the shroud.
Push the headlight back on its springs and move sideways to release the Headlight.
Remove the connector from the bulb to completely free the Headlight.
Take of the rubber boot and release the spring clip holding the Bulb in place.
Fit new bulb, do not touch the glass part of the bulb, look the spring clip back and follow the steps in reverse
Switch on and check they light up. Once all back together replace the Fuse and the lights will drop again.
Turn off headlights and the lights will go out but will stay lifted.
Remove the Screws that hold the shrouds and remove the shroud.
Push the headlight back on its springs and move sideways to release the Headlight.
Remove the connector from the bulb to completely free the Headlight.
Take of the rubber boot and release the spring clip holding the Bulb in place.
Fit new bulb, do not touch the glass part of the bulb, look the spring clip back and follow the steps in reverse
Switch on and check they light up. Once all back together replace the Fuse and the lights will drop again.
Who is online
Users browsing this forum: No registered users and 94 guests