cant engage any gear

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Alan8086
Full Member
Posts: 114
Joined: Sun Sep 09, 2018 12:49 am

Re: cant engage any gear

Post by Alan8086 » Wed Sep 19, 2018 6:55 pm

I ended up bleeding the slave cylinder - nothing came out for a few seconds and then fluid came out of the bleed nipple. I can also see fluid on the engine mount below the cylinder so it's obviously been leaking.
It now moves the clutch arm when you depress the clutch - still no gear changes though.

My final theory is that it isn't moving the clutch arm far enough. I've got a new slave cylinder off eBay for £16. I'll fit it tomorrow and see what happens.

Just in case I have to admit defeat, I have a quote off a local car shop/garage - £88 for the clutch and £100 to fit it. The garage guy was the only one so far that didn't scream and run when I mentioned ford probe. Says there is another one in town he has worked on.

Oh, ill probably keep the old cylinder and refurbish with a rock auto repair kit - ready for next time! Same for the master cylinder.

ICKLE
Site Admin
Posts: 508
Joined: Thu Sep 06, 2018 8:42 pm

Re: cant engage any gear

Post by ICKLE » Wed Sep 19, 2018 9:01 pm

That's a very good price for supply and fit a new clutch ;)

Alan8086
Full Member
Posts: 114
Joined: Sun Sep 09, 2018 12:49 am

Re: cant engage any gear

Post by Alan8086 » Thu Sep 20, 2018 8:15 pm

Everything is cheap where I live. Car repairs, housing, rent - no one wants to live here! You do have to be more careful with the end result however. You get what you pay for and its a problem in and of itself.

Alan8086
Full Member
Posts: 114
Joined: Sun Sep 09, 2018 12:49 am

Re: cant engage any gear

Post by Alan8086 » Tue Sep 25, 2018 6:55 pm

Finally back on the road :)

Garage where at it from 8am to 6pm - said it was the worst (most difficult) clutch job they had done!

Kit
Tech Rep
Posts: 3413
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 67 times
Been thanked: 103 times

Re: cant engage any gear

Post by Kit » Tue Sep 25, 2018 7:53 pm

Alan8086 wrote:
Tue Sep 25, 2018 6:55 pm
Finally back on the road :)

Garage where at it from 8am to 6pm - said it was the worst (most difficult) clutch job they had done!
In that case they haven’t worked on a Probe before :o
I’ve must have done 5 clutch’s my now, normally don’t rush them & do over two days, but that’s with out a lift/workshop equipment etc.
Did on once in one day, but that was working with an experienced engineer. Again not in a workshop

Kit

ICKLE
Site Admin
Posts: 508
Joined: Thu Sep 06, 2018 8:42 pm

Re: cant engage any gear

Post by ICKLE » Tue Sep 25, 2018 7:59 pm

Hence my reply :lol: they obviously had never done one before and didn't realise how hard they are to do otherwise the price would have been a lot higher :lol: :lol: like I said cheap for a clutch change :lol: :lol:

Alan8086
Full Member
Posts: 114
Joined: Sun Sep 09, 2018 12:49 am

Re: cant engage any gear

Post by Alan8086 » Wed Sep 26, 2018 12:37 pm

I think they actually got someone in to do it - someone with a European accent. He approved of the car, mentioned that he owned a Ford Cougar so maybe they had to get some 'experience' in? Anyway - the price and the result was pleasing!

Alan8086
Full Member
Posts: 114
Joined: Sun Sep 09, 2018 12:49 am

Re: cant engage any gear

Post by Alan8086 » Wed Sep 26, 2018 12:41 pm

Oh - the row I thought came from the modded exhaust on my car - is no longer there! All this time I assumed it was meant to sound like that and now the garage have dis/reassembled the exhaust - its gone all quiet and civilised. My wife had a good laugh at that! I'm meant to know about car related stuff! My son isn't pleased though :(

Incognito
Full Member
Posts: 2226
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: cant engage any gear

Post by Incognito » Wed Sep 26, 2018 8:28 pm

Alan8086 wrote:
Wed Sep 26, 2018 12:41 pm
Oh - the row I thought came from the modded exhaust on my car - is no longer there! All this time I assumed it was meant to sound like that and now the garage have dis/reassembled the exhaust - its gone all quiet and civilised. My wife had a good laugh at that! I'm meant to know about car related stuff! My son isn't pleased though :(
:lol: :lol: :lol:

mmm24v
Full Member
Posts: 282
Joined: Thu Sep 06, 2018 9:54 pm
Has thanked: 3 times

Re: cant engage any gear

Post by mmm24v » Wed Sep 26, 2018 8:43 pm

Incognito wrote:
Wed Sep 26, 2018 8:28 pm
Alan8086 wrote:
Wed Sep 26, 2018 12:41 pm
Oh - the row I thought came from the modded exhaust on my car - is no longer there! All this time I assumed it was meant to sound like that and now the garage have dis/reassembled the exhaust - its gone all quiet and civilised. My wife had a good laugh at that! I'm meant to know about car related stuff! My son isn't pleased though :(
:lol: :lol: :lol:

Can't say I would be either ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 80 guests