UKPOC forums

HI,

Still hunting for the cause of SRS code 13. I have tested the connector for what I believe to be the drivers seatbelt pretensioner (white clip under seat, not the one connecting to under carpet but strapped to the underside of the seat) and have a resistance of 0. I wanted to check the passenger seat but nothing there Im hoping somebody would be able to confirm that it should have a resistance?

Charles

Have you checked front crash sensor for good earth/theres no pre tensioner

I have tested the resistance on the crash sensors and have a resistance of 1181 on them. My knowledge of electrical circuits and testing is very limited. Is there any circuit to test under the seat relevant to the airbag system?

Charles