Radio code input....

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Micron
Site Admin
Posts: 3198
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 53 times
Been thanked: 85 times

Re: Radio code input....

Post by Micron » Fri Jan 26, 2024 12:13 am

Robert2018 wrote: ↑
Thu Jan 25, 2024 10:39 pm
 So mine did this also . Reg then code but no way to enter . I fiddled for ages and nothing happened . I then jist left the car running for a while 15 mins with code solid came back and it was ready to input .

Issue is i dont know the code to input now haha .

Anyone know how to get it.

Cheers
Have you got any books with the car that might have the code? Or if you pull the radio out and fine the serial number that starts with a M you can get the number easy enough
Admin and Owner of this fine club 😎
Top
cpt black
Tech Rep
Posts: 2701
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 85 times

Re: Radio code input....

Post by cpt black » Fri Jan 26, 2024 11:57 am

As said leave ignition on and radio on for 10/15 minutes then re check for flashs just dont keep
entering codes as will lock out after 10 attempts
Top
Robert2018
Full Member
Posts: 12
Joined: Sun Dec 31, 2023 7:22 pm

Re: Radio code input....

Post by Robert2018 » Fri Jan 26, 2024 12:08 pm

Mines a radio from a escort according to reg so will have to do the pull out serial number job .

Thanks
Top
Wolfie
Full Member
Posts: 57
Joined: Wed May 31, 2023 3:57 pm
Has thanked: 2 times
Been thanked: 3 times

Re: Radio code input....

Post by Wolfie » Fri Jan 26, 2024 3:28 pm

OK so left ignition on for 20 mins and yes the code display started flashing...
Put code in off paperwork supplied with car and no joy so guess it's the wrong code..
So next thing is to remove radio to get the serial number...
Top
cpt black
Tech Rep
Posts: 2701
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 85 times

Re: Radio code input....

Post by cpt black » Fri Jan 26, 2024 4:10 pm

Need a new code then from the serial number then,as said the code buttons will flash ;)
Top
cpt black
Tech Rep
Posts: 2701
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 85 times

Re: Radio code input....

Post by cpt black » Fri Jan 26, 2024 5:05 pm

i have some radios with here but years changed 2006/rds/2007rds some have amplifier leads
sure your get a free code on here ;) if not i will need a picture of the rear of the plug connectors
to supply take it the old cassette player ;)
Top
Wolfie
Full Member
Posts: 57
Joined: Wed May 31, 2023 3:57 pm
Has thanked: 2 times
Been thanked: 3 times

Re: Radio code input....

Post by Wolfie » Mon Jan 29, 2024 7:30 pm

cpt black wrote: ↑
Fri Jan 26, 2024 11:57 am
 As said leave ignition on and radio on for 10/15 minutes then re check for flashs just dont keep
entering codes as will lock out after 10 attempts
So after rechecking all paperwork found a second radio code.... So thanks to Cpt black did the ignition reset again and it accepted the second code...

So fully functional again
Happy days....
Top
cpt black
Tech Rep
Posts: 2701
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 85 times

Re: Radio code input....

Post by cpt black » Mon Jan 29, 2024 7:32 pm

good news well done
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 160 guests