For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Micron
- Site Admin
- Posts: 3198
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Tue Jan 09, 2024 3:56 pm
Funokata wrote: ↑Tue Jan 09, 2024 3:54 pm
I don't know to be honest. I wasn't aware there were multiple types. Is there a way to know which one I should have?
What year is your car, does it still have the side mouldings, if it does do they go on to the front wings
Admin and Owner of this fine club
-
Funokata
- Full Member
- Posts: 41
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 1 time
- Been thanked: 4 times
Post
by Funokata » Tue Jan 09, 2024 3:59 pm
1994. What side mouldings do you mean?
-
Micron
- Site Admin
- Posts: 3198
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Tue Jan 09, 2024 4:08 pm
Funokata wrote: ↑Tue Jan 09, 2024 3:59 pm
1994. What side mouldings do you mean?
If it's a 1994, then it will be an early dizzy, the same as these at Rockauto
https://www.rockauto.com/en/catalog/for ... butor,7108
The mouldings are on the side of the car, some have been taken off, they run across the doors etc, same colour as the car
Admin and Owner of this fine club
-
Funokata
- Full Member
- Posts: 41
- Joined: Fri Apr 01, 2022 7:42 am
- Has thanked: 1 time
- Been thanked: 4 times
Post
by Funokata » Tue Jan 09, 2024 4:26 pm
Ah yes. It does have those. Thanks for the link. Is there any way to improve or upgrade the reliability of these dizzys? Is it a certain part that fails?
-
Micron
- Site Admin
- Posts: 3198
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Tue Jan 09, 2024 4:51 pm
Funokata wrote: ↑Tue Jan 09, 2024 4:26 pm
Ah yes. It does have those. Thanks for the link. Is there any way to improve or upgrade the reliability of these dizzys? Is it a certain part that fails?
Do you still have your immobiliser fitted (little black fob), if you do, then that needs to be by-passed, apart from that I don't think so, unless you go down the route of either external ignition coils or a mega squirt (lots of money)
Admin and Owner of this fine club
-
Kit
- Tech Rep
- Posts: 3418
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 67 times
- Been thanked: 106 times
Post
by Kit » Tue Jan 09, 2024 5:54 pm
Funokata wrote: ↑Tue Jan 09, 2024 3:59 pm
1994. What side mouldings do you mean?
Bump strips
Long ones, on to the front wings - early
Short ones. Not on front wings late cars
Cross over cars - both
Kit
Who is online
Users browsing this forum: No registered users and 165 guests
