UKPOC forums

Ford Probe 1994 2.0

I have a leak from the screen washer bottle .
How do you remove it. I understand you have to remove the wheel arch splash shield but how is the bottle attached on and what connections are there
Thanks

Few bolts and a electrical connector under the wheel arch (wheel off just do the front section on the arch panel pull back )
if you want to unscrew from the top and take the whole unit out ;)You may find its just the grommet on the pump motor

Thanks for the help.
I peeled back the splash shield and the tube had become detached from the pump.
Having replaced it the low indicator light stays on. I read a previous post about removing and giving it a good clean as it has been untouched for 29 years.
There is a nut securing it at the top are there two at the bottom.

Thanks

put some soda cyrstals in the bottle with hot water and leave overnight

cpt black wrote: ↑

Wed Nov 08, 2023 6:47 pm

put some soda cyrstals in the bottle with hot water and leave overnight

What do soda crystals do then Kev. And where do you get them?

they can remove limescale etc have many uses and you can get from most food stores
in the washing isle

cpt black wrote: ↑

Thu Nov 09, 2023 6:26 am

they can remove limescale etc have many uses and you can get from most food stores
in the washing isle

Thanks