Page 2 of 2
Re: Spoiler
Posted: Fri Oct 20, 2023 12:27 pm
by mojo98
Emails sent
Top tip. After cutting out the templates, and fitted to boot lid, offer up the spoiler and check that the fixing match up the X marks on the template before drilling,
And the other thing to check before drilling open the boot lid and check that you have large holes with rubber bungs on the underside of the boot lid, to enable you to fit the nuts the the bolts on the spoiler once fitted to the boot lid.
No all boot lids have the pre drilled holes on the underside
Re: Spoiler
Posted: Fri Oct 20, 2023 12:39 pm
by notoriousgoz
Excellent! Just need some decent weather now
Re: Spoiler
Posted: Fri Oct 20, 2023 5:01 pm
by Wolfie
I bought the black one to fit on mine.
No rubber bungs on underside of boot so a bit more complicated to fit
Re: Spoiler
Posted: Sat Oct 21, 2023 1:37 pm
by mojo98
Anybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Re: Spoiler
Posted: Sat Oct 21, 2023 1:45 pm
by Kit
mojo98 wrote: ↑Sat Oct 21, 2023 1:37 pm
Anybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Late cars only have these access bung for the spoliers fixings
Kit
Re: Spoiler
Posted: Sat Oct 21, 2023 2:53 pm
by mojo98
Kit wrote: ↑Sat Oct 21, 2023 1:45 pm
mojo98 wrote: ↑Sat Oct 21, 2023 1:37 pm
Anybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Late cars only have these access bung for the spoliers fixings
Kit
Plus Crossover's MrP (M Reg)
Re: Spoiler
Posted: Sat Oct 21, 2023 6:49 pm
by Wolfie
mojo98 wrote: ↑Sat Oct 21, 2023 1:37 pm
Anybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Better dig my hole cutting drill bits out...
Would you say the holes are about 50mm.