UKPOC forums

Can anyone give me information on how to replace the cruise module? 2.0 1995 probe Thanks in advance

notoriousgoz wrote: ↑

Mon Sep 18, 2023 7:14 pm

Can anyone give me information on how to replace the cruise module? 2.0 1995 probe Thanks in advance

Follow the Hayes manual

Never done one before,
but a few tips
Take photos of the set up before you start.
Check the replacement part is the same
Follow all the cables & wires to see where they’re connected to.
Undo these first, then unbolt unit

Kit

There are about 3 nuts that need to come off, plus the plug on the front, I found that the easiest option for the cable was to remove it from the module end and take the cable and fitting on to the new one.

It shouldn’t take that long.