Page 1 of 1
Clips and bits for back lights
Posted: Tue May 23, 2023 9:40 pm
by ryanandcharl
1995 Ford probe
2.0 16v petrol
Blue
So the car didn’t come with the lights and although to have a pair and centre piece, I don’t have the fixings. Rather than guess, could someone point out what screws/plugs/fixtures i need for the photos below. Tia
Re: Clips and bits for back lights
Posted: Wed May 24, 2023 8:42 am
by cpt black
Give Andy P A PM as he should have wot your after
Kev
Re: Clips and bits for back lights
Posted: Wed May 24, 2023 9:01 am
by Micron
Or Kit aka Duncan, he probabaly has a box full of bits.
Re: Clips and bits for back lights
Posted: Wed May 24, 2023 11:24 am
by Kit
Micron wrote: ↑Wed May 24, 2023 9:01 am
Or Kit aka Duncan, he probabaly has a box full of bits.
Back of the center panel often break, or rust out, normally I would set in place with a mastic dab,
With the lights it just suit able sized round head self tapper screw
Kit
Re: Clips and bits for back lights
Posted: Wed May 24, 2023 11:36 am
by andy p
These are the bits you need,
This is top fixing, Black plug and screw, below right
Below left, white clips go in the body Black clips go on the light before installation
The centre reflector is held on with screws inside the boot Which normally go rusty.
I hope this helps.
Andy