UKPOC forums

I have a problem! The heater / Blower seems to work in the Probe but no matter what button i select it will only blow out of the top windshield vents. I seem to remember reading a post about this potentially being down to a vacuum hose near the scuttle but i cannot identify where or what i am looking for - any help appreciated. Also if not this tube - any other ideas what it could be? (The green lights do light up on the pressed button).

Have you checked that the pipes are connected on the blower unit :?:And the motors are working on the
blower unit

Blower definitely works, as does the recirculate button and it blows cold and hot. I just cannot control where it blows out from!
Where is the vacuum line that people mention as a possible cause?

the blower unit is linked to the switch panel,its not vaccum there motorised
to direct the flaps on the blower unit,could be your switch control is Knackerd

That would make sense. Need to find a replacement then

Is this what you need



£20 posted

Kit

Hi
Definitely will take it.
Let me know your deer’s and will sort it out
Many thanks
Colin

Has this sorted the fault

Not had a chance to fit yet.
Had to sort out my slk R170 230 kompressor which failed its MOT. That’s now sorted so hope to fit this coming weekend