ABS warning light and chewed wires!

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
cpt black
Tech Rep
Posts: 2707
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 12 times
Been thanked: 85 times

Re: ABS warning light and chewed wires!

Post by cpt black » Sun Oct 23, 2022 3:12 pm

do the dash lights come on when key is turned,have you checked theres voltage to the starter solenoid
and no wires have been chew,d around there :?:

leon2000_3
Full Member
Posts: 117
Joined: Wed Jul 01, 2020 10:14 am
Has thanked: 1 time
Been thanked: 1 time

Re: ABS warning light and chewed wires!

Post by leon2000_3 » Sun Oct 23, 2022 3:39 pm

Yes all lights come on and the 4 beeps as normal when ignition is turned. I haven't noticed any chewed wires around there.

Kit
Tech Rep
Posts: 3420
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 67 times
Been thanked: 106 times

Re: ABS warning light and chewed wires!

Post by Kit » Sun Oct 23, 2022 8:22 pm

Have you power to other circuits :?:
Lights, Radio etc
If not check the 100amp main fuse :idea:

Kit

leon2000_3
Full Member
Posts: 117
Joined: Wed Jul 01, 2020 10:14 am
Has thanked: 1 time
Been thanked: 1 time

Re: ABS warning light and chewed wires!

Post by leon2000_3 » Sun Oct 23, 2022 8:59 pm

Thanks for that, will check that this week and report back.

cpt black
Tech Rep
Posts: 2707
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 12 times
Been thanked: 85 times

Re: ABS warning light and chewed wires!

Post by cpt black » Tue Oct 25, 2022 2:22 pm

Any updates :?:

leon2000_3
Full Member
Posts: 117
Joined: Wed Jul 01, 2020 10:14 am
Has thanked: 1 time
Been thanked: 1 time

Re: ABS warning light and chewed wires!

Post by leon2000_3 » Wed Oct 26, 2022 11:39 am

Updates: I disconnected both negative and positive battery terminals a couple days ago. Came back to the car this morning, reconnected terminals, and it seems to be firing up again as normal. Any ideas why it did that?

ABS warning light comes up after a few minutes of running. But at least I have the codes now. So I think I'm back to the original problem, seems the front and back right ABS sensors are at fault? What would be the next step in regards to getting that sorted? If I can get it sorted before the NEC show there's still a chance I can get an MOT and get the black one there.

Looking forward to hearing from you. Thanks again for all the advise guys.

Micron
Site Admin
Posts: 3203
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 53 times
Been thanked: 85 times

Re: ABS warning light and chewed wires!

Post by Micron » Wed Oct 26, 2022 11:43 am

Did you have any luck with an auto electrician, as they might be your best option, unfortunately I have no time between now and the show!!!
Admin and Owner of this fine club 😎

leon2000_3
Full Member
Posts: 117
Joined: Wed Jul 01, 2020 10:14 am
Has thanked: 1 time
Been thanked: 1 time

Re: ABS warning light and chewed wires!

Post by leon2000_3 » Wed Oct 26, 2022 11:47 am

I had an appointment at 9am this morning and the auto electrician cancelled! :roll:

On the hunt for another one.

leon2000_3
Full Member
Posts: 117
Joined: Wed Jul 01, 2020 10:14 am
Has thanked: 1 time
Been thanked: 1 time

Re: ABS warning light and chewed wires!

Post by leon2000_3 » Thu Oct 27, 2022 3:36 pm

Update: had an auto electrician come down, fixed the chewed wires which has gotten rid of one of the fault codes for the right side front sensor. Right side rear one remaining. I have an appointment with him again next week for this. Getting there! Thanks for all the advise guys. There's still hope!

cpt black
Tech Rep
Posts: 2707
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 12 times
Been thanked: 85 times

Re: ABS warning light and chewed wires!

Post by cpt black » Thu Oct 27, 2022 3:43 pm

Good news,just leave the battery diconnected to save a power drain

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests