For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Adam Brown
- Registered User
- Posts: 33
- Joined: Sun Aug 21, 2022 9:55 pm
- Has thanked: 1 time
Post
by Adam Brown » Mon Sep 05, 2022 8:23 pm
Can anyone help me figure out what's going on here.
I'm trying to refit a standard radio to my probe I've got my hands on an 2007rds.
I've pulled the aftermarket unit out and it had a patch lead to what I thought is the standard harness. But the speaker lead doesn't look genuine and there's no port in my radio for it.
I've followed it down to this connector block that looks factory but I don't think it is either.
I thought the standard speaker cable is similar to the grey but black.
TIA
Last edited by
Adam Brown on Mon Sep 05, 2022 8:39 pm, edited 1 time in total.
-
Adam Brown
- Registered User
- Posts: 33
- Joined: Sun Aug 21, 2022 9:55 pm
- Has thanked: 1 time
Post
by Adam Brown » Mon Sep 05, 2022 8:38 pm
Looking at previous posts I found on here this post mentions a patch lead to bypass the factory option amp when fitting after market stereo, that I'm thinking is what mine must have hence why I have this strange plug. Can anyone confirm if this is correct and if so, what factory radio should mine have to work with this original amp?
-
Micron
- Site Admin
- Posts: 3203
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Mon Sep 05, 2022 9:48 pm
Adam,
As per my Facebook response, you need to put up a wanted ad for the Speaker patch cable
Admin and Owner of this fine club
-
Probe3
- Full Member
- Posts: 59
- Joined: Thu May 26, 2022 10:18 am
- Has thanked: 16 times
- Been thanked: 3 times
Post
by Probe3 » Wed Sep 07, 2022 9:21 am
I just completely bypassed the useless factory amp, by running 4 twin wires direct from the head unit to the 4 coming out of the factory amp, then isolated the amp
-
Kit
- Tech Rep
- Posts: 3422
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 67 times
- Been thanked: 106 times
Post
by Kit » Thu Sep 08, 2022 8:38 am
Is this what you need
If so, Special Forum Member Price of £40, posted
A discount, would be available to a Full Member
Kit
-
Micron
- Site Admin
- Posts: 3203
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Thu Sep 08, 2022 10:02 am
Kit wrote: ↑Thu Sep 08, 2022 8:38 am
Is this what you need
If so, Special Forum Member Price of £40, posted
A discount, would be available to a Full Member
Kit
I believe that he needs the female connector, rather than the male one. It's the cable between the radio and the lead in your picture. The required lead is for the speakers, so should have the green, grey, purple & white coloured wires
Admin and Owner of this fine club
Who is online
Users browsing this forum: No registered users and 36 guests
