UKPOC forums

Jan took our 24v out to do shopping on Wednesday, while I was away in Scotland working.
Well, she came back in a RAC van, as the car was recovered back.
Called in at the local shop, started to come back home, couldn’t engage gears.
Now back home , I’ll look at it & you have lost all drive
But, I only replaced the clutch last year

So, what gone wrong
The clutch pedal feels good, the slave cylinder piston, pushing the clutch release bearing fork OK


What do I do now

Kit

Hate to say it but it sounds like the box has to come off to check the Clutch at least.
If everything is ok then it sounds like it’s internals on the Box

Jon G 24V wrote: ↑

Fri Apr 01, 2022 4:28 pm

Hate to say it but it sounds like the box has to come off to check the Clutch at least.
If everything is ok then it sounds like it’s internals on the Box

That’s what I think, as well. But it won’t be this weekend

Need to come up with a “Plan B”, so Jan can have a car

Kit

Do triple check that the slave cylinder IS pushing the clutch push rod , etc, properly before doing the big job.

Marshmallow time

jrh wrote: ↑

Fri Apr 01, 2022 5:07 pm

Do triple check that the slave cylinder IS pushing the clutch push rod , etc, properly before doing the big job.

Done that, it was the first thing I look at

Kit

Micron wrote: ↑

Fri Apr 01, 2022 5:54 pm

Marshmallow time

That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow

Kit

Kit wrote: ↑

Fri Apr 01, 2022 6:34 pm

Micron wrote: ↑

Fri Apr 01, 2022 5:54 pm

Marshmallow time

That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow

Kit

SBM?

Micron wrote: ↑

Fri Apr 01, 2022 6:35 pm

Kit wrote: ↑

Fri Apr 01, 2022 6:34 pm

Micron wrote: ↑

Fri Apr 01, 2022 5:54 pm

Marshmallow time

That’s was “Plan A”, but thing have moved on to “Plan B”,
Will be reviled tomorrow

Kit

SBM?

No, that needs welding ,

Kit

It’s an quick fix, solution

Kit