Code 32

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Micron
Site Admin
Posts: 3164
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Code 32

Post by Micron » Sun Apr 10, 2022 10:36 pm

paulp wrote:
Sun Apr 10, 2022 10:05 pm
Hi guys, this code 32 keeps popping up intermittingly, it can go a week with no code then it comes back out the blue. Didn't have it last weekend, but came to start it this morning & flashing straight away, drove it couple miles to destination, then when came to return it wasn't doing it ?. It was supposed to of had a new clock spring about a month ago to pass the MOT, anyone any ideas ?
I think that your next option is to try another clock spring, I think it's going to be a bit of trial and error.
Admin and Owner of this fine club 😎

paulp
Full Member
Posts: 241
Joined: Sat Jan 15, 2022 9:23 pm
Been thanked: 7 times

Re: Code 32

Post by paulp » Fri Apr 15, 2022 5:21 pm

Is it possible to trick this problem with a resistor & if so what OHM resistor would you use ?

Micron
Site Admin
Posts: 3164
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Code 32

Post by Micron » Fri Apr 15, 2022 5:29 pm

paulp wrote:
Fri Apr 15, 2022 5:21 pm
Is it possible to trick this problem with a resistor & if so what OHM resistor would you use ?
It is and I believe it’s a 1 ohm resistor, but I would wait for further confirmation
Admin and Owner of this fine club 😎

paulp
Full Member
Posts: 241
Joined: Sat Jan 15, 2022 9:23 pm
Been thanked: 7 times

Re: Code 32

Post by paulp » Sun Apr 17, 2022 6:58 pm

Hi Guys, can anyone confirm it's a 1 ohm resistor please ?

Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests