Flexible brake pipes.
Posted: Sun Oct 10, 2021 7:24 pm
Ford probe 2.0 1994
I am trying to replace the rear Flexi break pipes. Once you have removed the clips I assume the
pipe should pull out. Mine appear to be corroded to the mounts is there a way to remove these other than brute strength. Also the flare nut which connects the steel pipe to the Flexi is corroded. Is there any advice re undoing without damaging it.
I am trying to replace the rear Flexi break pipes. Once you have removed the clips I assume the
pipe should pull out. Mine appear to be corroded to the mounts is there a way to remove these other than brute strength. Also the flare nut which connects the steel pipe to the Flexi is corroded. Is there any advice re undoing without damaging it.