Door lock light

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Tott61
Full Member
Posts: 160
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Door lock light

Post by Tott61 » Tue Sep 28, 2021 7:35 pm

Ford Probe 16v 1994

Is it possible to change the bulb which illuminates the door lock.
Also if it can be changed where would you be able to find a replacement.

Thanks

Micron
Site Admin
Posts: 3161
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Door lock light

Post by Micron » Tue Sep 28, 2021 8:24 pm

It is possible, but not easy, as for where, you used to be able to go to Maplin’s but not sure now.
Someone will be along to tell you what ones you need
Admin and Owner of this fine club 😎

Tott61
Full Member
Posts: 160
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: Door lock light

Post by Tott61 » Tue Sep 28, 2021 8:40 pm

Thanks
I've looked at earlier posts on the forum and found which bulbs are used and where to buy them.
Also it looks like they are in a moulded plastic surround so probably not a job I can do.

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Door lock light

Post by Kit » Wed Sep 29, 2021 12:40 pm

The bulbs in the clip, that holds the lock in the door

Image

Image

Kit

Tott61
Full Member
Posts: 160
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: Door lock light

Post by Tott61 » Wed Sep 29, 2021 5:51 pm

Thanks for the photos

I assume the bulb is wired into the loom ie it doesn't unplug.

To replace it do you need to cut the wire and replace with a new connection.

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Door lock light

Post by Kit » Wed Sep 29, 2021 6:05 pm

Tott61 wrote:
Wed Sep 29, 2021 5:51 pm
Thanks for the photos

I assume the bulb is wired into the loom ie it doesn't unplug.

To replace it do you need to cut the wire and replace with a new connection.
Yes, I think it was wired into the loom.
In the photos, wiring was damaged when it was removed.

Kit

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Door lock light

Post by Kit » Fri Oct 01, 2021 1:25 pm

Here’s a photo of the lamp in the clip, in the door.
Showing the lamp is connected directly into the loom

Image

So, you would have to cut the wires, to see if you had a voltage there, & to replace the bulb

Kit

Tott61
Full Member
Posts: 160
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: Door lock light

Post by Tott61 » Fri Oct 01, 2021 3:01 pm

That's very helpful
Thanks

Tott61
Full Member
Posts: 160
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: Door lock light

Post by Tott61 » Fri Oct 01, 2021 6:57 pm

As well as the door light not working neither does the ignition light. I have removed the bulb and it is a 14v 1.4w rating which are unavailable in the UK. Europarts have a 12v 1.2w bulb will this work as Automotive bulbs are designed to work 13.5v to 14v. Or will it just fail faster.

Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests