rear caliper carrier mounting / ignition issue ?

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
peterb1126
Registered User
Posts: 20
Joined: Sat Jul 06, 2019 1:59 pm

rear caliper carrier mounting / ignition issue ?

Post by peterb1126 » Tue Aug 10, 2021 5:38 pm

hi unfortunately my ford probe 2.016v M reg has failed its MOT ... Caliper issues ... apparently they can source a replacement drivers side caliper but also need a " carrier mounting " ... does anybody know where i can source a replacement or refurbished one ... couldnt spot one on E-Bay .. any advice appreciated ... thanks peterb
my other Ford PROBE also 2.0l 16v is mysteriously cutting out randomely when stopping at lights or junction .. removing key several times and then shoving back works but obviously worrying ... new battery fitted and terminal connections sorted but still does it ....HELP !
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: rear caliper carrier mounting / ignition issue ?

Post by Kit » Tue Aug 10, 2021 7:46 pm

Ask CPT - black for a caliper.

Cutting out, more than likely a Dizzy issue

Kit
Top
peterb1126
Registered User
Posts: 20
Joined: Sat Jul 06, 2019 1:59 pm

Re: rear caliper carrier mounting / ignition issue ?

Post by peterb1126 » Wed Aug 11, 2021 8:15 am

Hi... and thanks for responding... will speak to the garage and get back to you... have a spare Distributor ... had to dismantle / break up my original Probe as it was rotting underneath ... loads of parts /panels etc in the garage but no caliper carrier mounting !
Top
jrh
Full Member
Posts: 1022
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 43 times

Re: rear caliper carrier mounting / ignition issue ?

Post by jrh » Wed Aug 11, 2021 8:47 am

Your MoT'd car has a complete caliper fitted ?
Therefor it must have a caliper mounting plate.
Top
Incognito
Full Member
Posts: 2269
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 48 times
Been thanked: 18 times

Re: rear caliper carrier mounting / ignition issue ?

Post by Incognito » Wed Aug 11, 2021 9:44 am

The cutting out, as Duncan says, probably dizzy, but check your coolant level as this can affect low idle/cutting out at a stop.
Top
Micron
Site Admin
Posts: 3335
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: rear caliper carrier mounting / ignition issue ?

Post by Micron » Wed Aug 11, 2021 9:48 am

Do you still have the factory fob with the car that you have to press before you can start the car? If you do, I would suggest that the immobiliser is by-passed / repaired depending on your preference, as it will only cause you more issues in time with the new distributor
Admin and Owner of this fine club 😎
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: rear caliper carrier mounting / ignition issue ?

Post by Kit » Wed Aug 11, 2021 2:48 pm

I’ll find you one at the weekend

This will give you time to show your support for the club & sign up for full membership, here’s the link

viewtopic.php?f=33&t=413

Kit
Top
peterb1126
Registered User
Posts: 20
Joined: Sat Jul 06, 2019 1:59 pm

Re: rear caliper carrier mounting / ignition issue ?

Post by peterb1126 » Wed Aug 11, 2021 11:20 pm

hi and thanks for all the responses to these issues ... have spoken to the garage today and they are gong to try and address the problems ! will wait and see ! have found a Distributor from original car and have this on standby
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: rear caliper carrier mounting / ignition issue ?

Post by Kit » Fri Aug 13, 2021 8:25 pm

Do you still want a carrier :?: :?:

Kit
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 42 guests