UKPOC forums

Tott61 wrote: ↑

Fri Jul 02, 2021 8:31 pm

Sorry. It is a 2.0 16 v. 1994

With. 16v, you can’t even see the start motor
(Just like modern cars )
To get at the terminals from the top.
The following will have to come off
The air filter & inlet elbow
The Inlet manifold & Throttle body
Throttle cable along with the cruise control system
There’s also rubber heater pipe that run into the cabin, May have to be disconnected.
Then there’s the electric loam that will get in the way

As the old saying goes “ you have to get out& get under”

Kit

It appears it's a lot easier going underneath.

Thanks

Sounds terribly complicated compared to a 24v