Page 1 of 2
Keyless entry
Posted: Sun Apr 25, 2021 7:12 pm
by Andy kay93
Hi all, so bought a cheap Chinese keyless entry kit from
eBay, and got the probe in pieces trying to fit it, I believe
I need to fit a resistor somewhere, does any body know
How to fit these as I haven’t got a clue, at the moment I have
A white and a white/black wire from the keyless system
And I’ve not got a clue where to fit them
Hope you can help
Andy k
Re: Keyless entry
Posted: Sun Apr 25, 2021 7:51 pm
by Kit
Re: Keyless entry
Posted: Sun Apr 25, 2021 7:54 pm
by Kit
UKPOC admin, might be able to help
Kit
Re: Keyless entry
Posted: Sun Apr 25, 2021 7:57 pm
by Micron
Hi Andy,
Send me your wiring diagram and I will work out which wires go where.
Trev
Re: Keyless entry
Posted: Sun Apr 25, 2021 8:24 pm
by Andy kay93
Hi Trevor,
Sending pictures, thank you
Re: Keyless entry
Posted: Sun Apr 25, 2021 8:44 pm
by Andy kay93
Hi Trevor, also found this posted by scooby
But it doesn’t show where white, white/black wires go
Re: Keyless entry
Posted: Sun Apr 25, 2021 9:18 pm
by Micron
I will take a look tomorrow
Re: Keyless entry
Posted: Sun Apr 25, 2021 9:27 pm
by Andy kay93
Great thanks Trevor,
Re: Keyless entry
Posted: Mon Apr 26, 2021 10:33 am
by Micron
Andy,
Do you think that you will want to flash the indicators when you fit the remote locking module?
Re: Keyless entry
Posted: Mon Apr 26, 2021 12:23 pm
by Andy kay93
Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
