Page 2 of 2
Re: Keyless entry
Posted: Mon Apr 26, 2021 1:32 pm
by Micron
Andy, what year is your car?
Re: Keyless entry
Posted: Mon Apr 26, 2021 1:43 pm
by Micron
Andy kay93 wrote: ↑Mon Apr 26, 2021 12:23 pm
Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
Ok, am I right in thinking then that you have power to the module?
Re: Keyless entry
Posted: Mon Apr 26, 2021 1:59 pm
by Andy kay93
Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
Re: Keyless entry
Posted: Mon Apr 26, 2021 2:16 pm
by Micron
Andy kay93 wrote: ↑Mon Apr 26, 2021 1:59 pm
Hi trever, yes I have power to module, and when I press
Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram,
I don’t know if this is the correct wiring diagram to use
And I don’t know where to connect white & white/ black if it is
Andy k
Ok, I have nearly figured it out
Re: Keyless entry
Posted: Mon Apr 26, 2021 3:41 pm
by Micron
Andy,
here you go, hopefully it makes sense, if not give me a call
As mentioned you will need a 12v relay (standard car type) and a 4.7K Ohm resistor
Andy Kay Remote Locking Diagram.pdf