Lazer brakes

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Lazer brakes

Post by mojo98 » Tue Mar 09, 2021 12:28 pm

Well as you all know I've been working (not much since contracting covid) only the bonnet to go back on the complete all the work on the engine/gearbox, need the bleed the clutch, and after doing the brakes, will need them bleeding as well

But time to get it finished. But rear brakes are siezed solid, so new caliper's required and discs and pads.
Stripped out the passenger rear and found this

Image
:o
So removed that and test fitted this
Image

So off to the power coating place to get them powered coated.
Have new caliper's and pads but no discs, :o
on order should be here tomorrow

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Lazer brakes

Post by Kit » Tue Mar 09, 2021 3:26 pm

Mojo,
I’m surprised at you :?
To let it get that rotten :shock:

As it one of your ‘daily drivers’, would you could consider using fibreglass/ABS plastic ones.

Saving the metal OME one’s, for the ‘show’ cars :idea:

At least it’s an easy fix :)

Kit

Micron
Site Admin
Posts: 3159
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Lazer brakes

Post by Micron » Tue Mar 09, 2021 4:06 pm

I think you are lucky that the bolts came off without breaking or rounding off :o
Admin and Owner of this fine club 😎

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Lazer brakes

Post by mojo98 » Tue Mar 09, 2021 4:26 pm

Kit wrote:
Tue Mar 09, 2021 3:26 pm
Mojo,
I’m surprised at you :?
To let it get that rotten :shock:

As it one of your ‘daily drivers’, would you could consider using fibreglass/ABS plastic ones.

Saving the metal OME one’s, for the ‘show’ cars :idea:

At least it’s an easy fix :)

Kit
I'm ashamed, but I blame it on parking it on the grass last year during lockdown, I was using MrP. It just fell to pieces while taking off the caliper, the more I touched it the more fell off, the drivers side wasn't has bad but removed it as well,
No need to put fibreglass on, I gave them to another member, plus I have 5 sets of brand new steel ones

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Lazer brakes

Post by mojo98 » Tue Mar 09, 2021 5:38 pm

Micron wrote:
Tue Mar 09, 2021 4:06 pm
I think you are lucky that the bolts came off without breaking or rounding off :o
Only snapped 1 of the bolts, drivers side rear abs sensor, but OK, will not move as its a very tight fit,

Note to self, more wd40 next time

jrh
Full Member
Posts: 958
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: Lazer brakes

Post by jrh » Wed Mar 10, 2021 12:36 pm

Well done Malcolm.
I was going to mention replacing all the brake caliper bolts for stainless , especially those on the rear calipers. Rounded heads are a real pain , best avoided.
Denso tape wound round the shaft on the rear calipers where it enters the ' lip seal ' in the caliper body helps too.
Those calipers were the design of an evil genius , too clever by half , with a fatal flaw.
M515 CEW will be due for it's MoT soon, would love to know who owns it now.
It lives within 50 mile of Rhayader , somewhere.
Definitely worth having for spares if it ever appears on eBay.

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Lazer brakes

Post by mojo98 » Wed Mar 10, 2021 1:13 pm

jrh wrote:
Wed Mar 10, 2021 12:36 pm
Well done Malcolm.
I was going to mention replacing all the brake caliper bolts for stainless , especially those on the rear calipers. Rounded heads are a real pain , best avoided.
Denso tape wound round the shaft on the rear calipers where it enters the ' lip seal ' in the caliper body helps too.
Those calipers were the design of an evil genius , too clever by half , with a fatal flaw.
M515 CEW will be due for it's MoT soon, would love to know who owns it now.
It lives within 50 mile of Rhayader , somewhere.
Definitely worth having for spares if it ever appears on eBay.
Thanks for the advice John, always try and use new bolts when doing jobs, got a few in stock, but will be calling into the local supplier tomorrow
Also have a roll of denso tape and use it 👍👍

Jon G 24V
Tech Rep
Posts: 658
Joined: Fri Sep 07, 2018 8:05 pm
Has thanked: 1 time
Been thanked: 6 times

Re: Lazer brakes

Post by Jon G 24V » Wed Mar 10, 2021 6:40 pm

Well done Malc 😎

mojo98
Tech Rep
Posts: 2529
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Lazer brakes

Post by mojo98 » Sat Mar 13, 2021 9:32 am

Back from the power coating, and started the assemble, plus new discs arrived
    Image



    Image


    Image

    cpt black
    Tech Rep
    Posts: 2663
    Joined: Fri Sep 07, 2018 8:28 am
    Has thanked: 10 times
    Been thanked: 82 times

    Re: Lazer brakes

    Post by cpt black » Sat Mar 13, 2021 12:47 pm

    Looking good there Malc keep up the good work ;)

    Post Reply

    Who is online

    Users browsing this forum: No registered users and 47 guests