UKPOC forums

Hi all. This is a 2 part question. Firstly has anybody experienced a very annoying clunk above your head whilst driving you probe. It sounds like its something on the sunroof mechanism but after removing the roof lining nothing appears loose? Also can the sunroof be adjusted to stop it bouncing up when I close the door?

Thanks

Yes, the sunroof is adjustable

Have you taken the roof lining off

It may be one of the bolts loose, that hold the sunroof tray to the roof

Kit

Yes the roof lining is out. The main nuts that hold the tray in are nice and tight. I see 4 nuts in each corner which can be turned by hand but I think they adjust the height of the roof panel. How does one adjust the lid so it doesnt bounce??

Have you got the “u” shape shims between the sunroof panel & the sliding gear?


Part 9 on the above

Kit

Yes. Am I right in thinking the go between the panel and the slider it attaches to. It has 2 or them. Both on the rear of the panel. But none on the front.

Also I have been told to burn my haynes manual . Do you no of an alternative manual that I can buy?

M4rksc wrote: ↑

Wed Dec 23, 2020 8:30 pm

Also I have been told to burn my haynes manual . Do you no of an alternative manual that I can buy?

There is A ‘Chilton’ manual, i’ve got one somewhere.
& of course the 4 volumes of the Ford Workshop Manuals, that sometimes come up for sale

Kit

M4rksc wrote: ↑

Tue Dec 22, 2020 10:49 pm

Yes. Am I right in thinking the go between the panel and the slider it attaches to. It has 2 or them. Both on the rear of the panel. But none on the front.

There is adjustment in the sunroof sliding gear, but before I’ve had added extra shims to bring the roof level

Kit