Speedo drive removal
Posted: Sat Nov 21, 2020 2:10 pm
Once I have taken the bolt out of the Speedo drive, will the sensor move side to side to help free it if it's persuaded a bit?
Here is a picture of one,
Page 1 of 1
Re: Speedo drive removal
Posted: Sat Nov 21, 2020 3:02 pm
No it won't move side to side because it sat on a little stud, once it's above the stud then it will move side to side
Here is a picture of one,
Here is a picture of one,
Re: Speedo drive removal
Posted: Sat Nov 21, 2020 3:52 pm
How do I get it out then?
Re: Speedo drive removal
Posted: Sat Nov 21, 2020 4:38 pm
this is something i need to do aswell had a look and its in a awful position for now i have a gps speedo but any tips would be good
Re: Speedo drive removal
Posted: Sat Nov 21, 2020 6:13 pm
Well I've never (touch wood) changed one.
But have seen one removed but that was with a big hammer, and guess what
It snapped,
My suggestion would be remove the fixing both then loads and loads of wd40, then leave it, letting it soak in then with a very thin bladed screw driver, try and ease it up
Ask Aaron how he changed his, he may be able to put a view on it,
There again if it not working does it matter if you damage it while removing it
But have seen one removed but that was with a big hammer, and guess what
It snapped,
My suggestion would be remove the fixing both then loads and loads of wd40, then leave it, letting it soak in then with a very thin bladed screw driver, try and ease it up
Ask Aaron how he changed his, he may be able to put a view on it,
There again if it not working does it matter if you damage it while removing it
Re: Speedo drive removal
Posted: Sat Nov 21, 2020 7:28 pm
I'm trying to save the one from the breaker, so don't to break it if possible 
