Page 1 of 1

rear track control arm

Posted: Sun Oct 18, 2020 6:04 pm
by paulinpoole
im needing one of these as one of the bolts sheared off :roll: not urgent tho
Is this the correct part for our cars as its a mazda number 0525 GE
ebay item no 193525962653
or has someone got the ford number please
thanks in advance 8-)

Re: rear track control arm

Posted: Sun Oct 18, 2020 7:54 pm
by mojo98
Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image

Re: rear track control arm

Posted: Sun Oct 18, 2020 8:12 pm
by MikeyG
All the control arms are interchangeable with the 626 ge right?

Re: rear track control arm

Posted: Mon Oct 19, 2020 9:09 pm
by paulinpoole
MikeyG wrote:
Sun Oct 18, 2020 8:12 pm
All the control arms are interchangeable with the 626 ge right?
thats what i was thinking :)

Re: rear track control arm

Posted: Fri Oct 23, 2020 9:10 pm
by paulinpoole
mojo98 wrote:
Sun Oct 18, 2020 7:54 pm
Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image
malc it is the trailing arm i want,no 11,my boob :?
any idea if this would fit being a mazda GE part ?
thanks 8-)

Re: rear track control arm

Posted: Sat Oct 24, 2020 8:27 am
by jrh
Don't throw the old one away !
To remove old bushes , just run a fine hacksaw cut along the 'cylinder' enclosing the bush.
A screwdriver in the gap, prise it open , tap old bush out.
Now you have a choice if you cannot find the proper item.
The cheap items from Latvia have good bushes which can be welded into your old trailing arm.

Re: rear track control arm

Posted: Sat Oct 24, 2020 9:16 am
by cpt black
When you say bolt sheared off do you mean the bolts that hold the handbrake
cable on to the arm :?: if so just tack weld a m6 bolt on or cable tie on

Re: rear track control arm

Posted: Sun Oct 25, 2020 12:15 pm
by paulinpoole
hiya,yes one of the handbrake bolts sheared off,even tho i wd40 and wire brushed it first :roll:
luckily one is still on there holding cable in place,so yes thanks i will use a cable tie as dont have access to a weld
cheers mate 8-)