Page 2 of 2
Re: Exhaust done
Posted: Fri Sep 11, 2020 12:33 pm
by Dakota
Hi Kit thanks for that are they easy to replace the seals and will I need specialist tools .
Re: Exhaust done
Posted: Sun Sep 13, 2020 4:42 pm
by Kit
Dakota,
You were asking about brake master cylinder, here’s a few Photos
By the looks of it, its straight forward, a pair of ‘curclip’ pliers to remove the retaining clip, then remember the order of the seals & springs.
Remember to re-new the hose Clutch master cylinder. While your at it, re-new the seals to that too
Kit
Re: Exhaust done
Posted: Sun Sep 13, 2020 8:28 pm
by Dakota
Kit wrote: ↑Sun Sep 13, 2020 4:42 pm
Dakota,
You were asking about brake master cylinder, here’s a few Photos
By the looks of it, its straight forward, a pair of ‘curclip’ pliers to remove the retaining clip, then remember the order of the seals & springs.
Remember to re-new the hose Clutch master cylinder. While your at it, re-new the seals to that too
Kit
Nice one Kit how much do you want for the master cylinder and I'd that link directly to the needed parts to refresh ?
Re: Exhaust done
Posted: Sun Sep 13, 2020 9:14 pm
by Kit
I have an idea
Here’s the deal, it’s a long term one to help both of us out.
I send you the Brake master cylinder + a clutch master cylinder ( this I’ve noticed got two seal repairs kits with it). You cover the cost of the postage, say £5.
If you obtain two Brake cylinder repair seal kits.
In you own time, replace the seals in both units I’ve sent you .
So there ready to fit.Swap them over, get your brakes & clutch working again.
Then, re -refurb, your units (easy as you’re done it before). & send them back to me
How does that sound
Think about it, & PM is your address
Kit
Re: Exhaust done
Posted: Sun Sep 13, 2020 9:23 pm
by Kit
Clutch cylinder & kits
Just to show you I do have them
Kit
Re: Exhaust done
Posted: Sun Sep 13, 2020 9:40 pm
by Dakota
Kit wrote: ↑Sun Sep 13, 2020 9:23 pm
Clutch cylinder & kits
Just to show you I do have them
Kit
Ok awesome stuff sounds a good deal to me but won't likely be doing or having the rest of the braking system as I would like to upgrade hoses to braided , discs to grooved and drilled and pads ebc untill the new year as can only afford to buy parts to refresh once a month and the master cylinder is the one that was worrying me done callipers and pads and discs plenty of times
Re: Exhaust done
Posted: Mon Sep 14, 2020 10:08 am
by Kit
I know it’s a long term project, for you.
But I can wait, for the return parts, no rush.
Just keep the club updated with progress
Kit
Re: Exhaust done
Posted: Mon Sep 14, 2020 2:42 pm
by Dakota
That's brilliant thanks so much will definitely update can't wait till this virus goes and get to shows next year that was another reason of buying her .