Page 1 of 1
Retro fitting of Cruise Control
Posted: Mon Aug 03, 2020 6:37 pm
by Micron
Do all Probes have the wiring for cruise control? If I removed the modules, cables, switches etc, from a breaker, could I retro fit it all on too a car that currently doesn't have it?
Re: Retro fitting of Cruise Control
Posted: Mon Aug 03, 2020 7:31 pm
by Kit
Is there a ‘inter face’ with the ECU
Kit
Re: Retro fitting of Cruise Control
Posted: Mon Aug 03, 2020 8:06 pm
by Micron
Kit wrote: ↑Mon Aug 03, 2020 7:31 pm
Is there a ‘inter face’ with the ECU
Kit
There could be, but I guess if the cruise equipment came from the same year range as the car it's going on, I could also change the ecu if need be?
Re: Retro fitting of Cruise Control
Posted: Mon Aug 03, 2020 8:19 pm
by Kit
Micron wrote: ↑Mon Aug 03, 2020 8:06 pm
Kit wrote: ↑Mon Aug 03, 2020 7:31 pm
Is there a ‘inter face’ with the ECU
Kit
There could be, but I guess if the cruise equipment came from the same year range as the car it's going on, I could also change the ecu if need be?
Only no early cars, cross over & late car you have Temic systems, with matched ECU’s
Kit
Re: Retro fitting of Cruise Control
Posted: Mon Aug 03, 2020 8:28 pm
by Micron
Good point, the kit is coming from an early one.
Re: Retro fitting of Cruise Control
Posted: Tue Aug 04, 2020 9:04 am
by jrh
You really need a copy of the speed control diagram.
PM me and I'll send you one.
You will be pleased to know the Cruise control is a 'stand-alone' system, not connected to the ECU.