heater resistor for 96 probe

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
mojo98
Tech Rep
Posts: 2531
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: heater resistor for 96 probe

Post by mojo98 » Fri Feb 21, 2020 4:37 pm

jheath17 wrote:
Fri Feb 21, 2020 1:53 pm
Heater resistor fault is that the cause of the heater blower not working in some positions? My blower only works at the minimum and maximum speed.
Yes that's the problem, your fan position 2 & 3 have blown, no4 is a direct feed so always works
1,2,3 are controlled by the resistor

Slick
Full Member
Posts: 821
Joined: Fri Sep 07, 2018 4:07 pm
Been thanked: 12 times

Re: heater resistor for 96 probe

Post by Slick » Fri Feb 21, 2020 6:20 pm

Pretty sure I have a couple knocking about, if confirm the right type...

fuerte
Full Member
Posts: 884
Joined: Fri Sep 07, 2018 10:10 am
Has thanked: 22 times
Been thanked: 1 time

Re: heater resistor for 96 probe

Post by fuerte » Thu Mar 05, 2020 4:51 pm

I had the 96 resistor 4 in a line.I bought second hand early resistor 2 by 2 but complete with connector cut off wires below connector.An auto electrician rewrired it in for me so far so good.Also 2 by 2 easier to source if go again.

Post Reply

Who is online

Users browsing this forum: Micron and 31 guests