car breaker auction
-
- Full Member
- Posts: 167
- Joined: Sun Sep 16, 2018 6:16 pm
- Been thanked: 1 time
car breaker auction
hi all been a while
theres a breaker yard naer me thats got a seafoam ? green N533 KGP for auction £150 (mine N481 KGP )
really tempted for a heap of donor parts as hard to get down here.
i see its a s3 dizzy so later type engine
would this engine wiring etc go straight into mine 1995 with s1 dizzy or would ecu have to be changed to work or anything else need to be changed ?
need to check out pros and cons before i might bid
thanks for any advice,paul
https://auctions.trents.co.uk/auction/i ... r20&sort=0
theres a breaker yard naer me thats got a seafoam ? green N533 KGP for auction £150 (mine N481 KGP )
really tempted for a heap of donor parts as hard to get down here.
i see its a s3 dizzy so later type engine
would this engine wiring etc go straight into mine 1995 with s1 dizzy or would ecu have to be changed to work or anything else need to be changed ?
need to check out pros and cons before i might bid
thanks for any advice,paul
https://auctions.trents.co.uk/auction/i ... r20&sort=0
-
- Tech Rep
- Posts: 2634
- Joined: Thu Sep 06, 2018 10:52 pm
- Location: Billingham
- Has thanked: 41 times
- Been thanked: 55 times
Re: car breaker auction
If £150 is for the whole car, snap it up Paul, parts alone will get you you money back,
Q, have you been down to see it, if so what are the door seal like,
Bodywork looks OK from what I can see
Q, have you been down to see it, if so what are the door seal like,
Bodywork looks OK from what I can see
-
- Tech Rep
- Posts: 3556
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Re: car breaker auction
No issues with the engine, but be careful with the IM & injection wiring, would be best to keep you MI & wiring.
As for the Dizzy, just keep yours & wiring
So all you really swap, is the block.
Yes, I did try to swap, early/ later, found the plugs etc didn’t work,
Oil sender difference, so may have to swap that as well
Kit
As for the Dizzy, just keep yours & wiring
So all you really swap, is the block.
Yes, I did try to swap, early/ later, found the plugs etc didn’t work,
Oil sender difference, so may have to swap that as well
Kit
-
- Full Member
- Posts: 167
- Joined: Sun Sep 16, 2018 6:16 pm
- Been thanked: 1 time
Re: car breaker auction
i havnt been to see it yet,not going to unfortunately.
went to register online to bid and its a £50 registration fee for 1 year subscription
then cost of car £150 if i was only bidder
then a hammer down charge of £50
then a administration fee of £15
then 20% VAT
phoned them up and that was confirmed right
so not so cheap in the end
so another for the crusher i guess,unless somebody here wants it
gutted
thanks for your replys guys
went to register online to bid and its a £50 registration fee for 1 year subscription
then cost of car £150 if i was only bidder
then a hammer down charge of £50
then a administration fee of £15
then 20% VAT
phoned them up and that was confirmed right
so not so cheap in the end
so another for the crusher i guess,unless somebody here wants it
gutted
thanks for your replys guys
-
- Full Member
- Posts: 167
- Joined: Sun Sep 16, 2018 6:16 pm
- Been thanked: 1 time
- Scooby
- Registered User
- Posts: 488
- Joined: Fri Sep 21, 2018 11:49 am
- Has thanked: 4 times
- Been thanked: 3 times
Re: car breaker auction
I used to like wandering around Trent's back in the '90s, before all this H&S stuff came in. It was handy being able to browse so many different makes and models to see what I could use to modify my various cars.
Shame we'll never see that sort of scrap yard ever again.
Shame we'll never see that sort of scrap yard ever again.
Member no: 227
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Location: Banks, Nr Preston, Lancs.
Drives: 2x 24V - Japha and Chewie
Who is online
Users browsing this forum: Google [Bot] and 22 guests