Page 1 of 1

iac valve

Posted: Sun Nov 10, 2019 6:04 pm
by Rikki5
Hi all still no joy with the hi idle have removed and cleaned throttle body and iac valve .but the Haynes manual says you remove two screw to get at valve but I had to take off the bottom of throttle body four screws see photos valve moves with hot water and moves back with cold about 5mm movement is this as should be any other ideas out there as to check cheers Rikki
Image

Image

Image
Image

Image

Re: iac valve

Posted: Mon Nov 11, 2019 4:09 pm
by cpt black
PM,D