iac valve

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Rikki5
Full Member
Posts: 21
Joined: Sat Sep 08, 2018 10:43 pm

iac valve

Post by Rikki5 » Sun Nov 10, 2019 6:04 pm

Hi all still no joy with the hi idle have removed and cleaned throttle body and iac valve .but the Haynes manual says you remove two screw to get at valve but I had to take off the bottom of throttle body four screws see photos valve moves with hot water and moves back with cold about 5mm movement is this as should be any other ideas out there as to check cheers Rikki
Image

Image

Image
Image

Image

cpt black
Tech Rep
Posts: 591
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 1 time
Been thanked: 10 times

Re: iac valve

Post by cpt black » Mon Nov 11, 2019 4:09 pm

PM,D

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests