UKPOC forums

As the title suggests.............

Lower front wishbone bolts and nut... required

Had to cut mine off when replacing the wishbones,

so any one know the replacement bolt and nut size....

or a link to buying one......

Many thanks,
need it for the MOT

An M10 bolt 50mm long + use a Ny-loc nut

Got a OME one here if you need it

Kit

Thanks Duncan,

I am sure i have one in my spares somewhere also......but just needed the info.

i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol

many thanks for the offer.

Thanks for the info.

See you soon.

Kit wrote: ↑

Sat Aug 10, 2019 11:58 pm

An M10 bolt 50mm long + use a Ny-loc nut

Got a OME one here if you need it

Kit

that sounds like the lower ball joint to the hub.....

i was after the long one at the front of the wishbone

nut is held by a welded cage,
and thats where the dirt gets stuck and it rusts it all up......

bolt feeds from the front.....

looks like about 100mm long from under the bolt head to the end.
Maybe an M12???

please can anyone clarify.

thank you

It M12 (because you use a 17mm socket on it)

Kit

If you can’t find a bolt, you could use a length of M12 studding, & use two nuts on the studding to make the length of bolt you need.

Kit

Wayne,

Do you need the nut as well?

as a last resort, could you remove the other one and use it as a guide, then go to a local ironmongers to get a replacement bolt etc?