UKPOC forums

Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please.
i bought a metric set from halfrauds and the two sizes that are closest are not quite right
(slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect)
and getting a very very slight leak,so need to change them
thanks in advance

UNPEELED & RETEALED

Paul,
Don’t know the size, but could find you an used OME one, if that’s an good

Kit

hi kit,
thanks bud
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all

i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good