Page 1 of 1

copper crush washers

Posted: Sat Aug 03, 2019 9:39 am
by paulinpoole
Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please.
i bought a metric set from halfrauds and the two sizes that are closest are not quite right
(slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect)
and getting a very very slight leak,so need to change them
thanks in advance 8-)

UNPEELED & RETEALED ;)

Re: copper crush washers

Posted: Sun Aug 04, 2019 5:41 pm
by Kit
Paul,
Don’t know the size, but could find you an used OME one, if that’s an good :)

Kit

Re: copper crush washers

Posted: Mon Aug 05, 2019 10:11 am
by paulinpoole
hi kit,
thanks bud :)
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all 8-)

Re: copper crush washers

Posted: Sun Aug 11, 2019 8:48 pm
by paulinpoole
i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good 8-)