Breakdown

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Breakdown

Post by Incognito » Sat Jul 27, 2019 7:53 pm

As if anytime is a good time , but the evening before a car show. Apologies for not going to be able to attend Beaumanor tomorrow Kaz and Jon. Car failed big time on the way back from Sleaford today, speedo and rev counter bouncing all over , lights failed , raining like mad and wipers went on snails pace , some things only worked when I shut other things down. Last mile or so indicators failed , then all shut down and I was stranded. All in the pouring rain of course 🙄. I replaced the battery with a known good one and got moving but the right hand side yellow/orange light is on unless I rev it. Amp meter hardly moves. Alternator failed ? I'll Facebook a photo of the dash , hopefully someone can clarify please. Kaz let me know PayPal and I'll square up the entrance cost . I've an alternator I got from an xedos last year but is it much of a job to swap over ?

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: Breakdown

Post by jmx6 » Sat Jul 27, 2019 8:53 pm

I did the alternator on my MX6 and it was a radiator out job to give access - other than the extra work that entails it was pretty straightforward.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Sat Jul 27, 2019 9:02 pm

jmx6 wrote:
Sat Jul 27, 2019 8:53 pm
I did the alternator on my MX6 and it was a radiator out job to give access - other than the extra work that entails it was pretty straightforward.
You're my friend justin....when are you free ? I've got an unknown spare from an Xedos in my shed .... :D

mojo98
Tech Rep
Posts: 2531
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Breakdown

Post by mojo98 » Sat Jul 27, 2019 10:28 pm

Like Justin says, its a easy fix,, radiator out, But I did mine from below without managing to remove the radiator, Just remember to undo the locking nut on the belt system,
whole job should take less than 1 hour :D

cpt black
Tech Rep
Posts: 2666
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 82 times

Re: Breakdown

Post by cpt black » Sun Jul 28, 2019 9:19 am

Easy job Paul I always take the rad out hate working under cars ,gives a chance to
flush the rad out,wd40 the screw tensioner as well before slackening the pulley bolt

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: Breakdown

Post by jmx6 » Sun Jul 28, 2019 8:00 pm

Incognito wrote:
Sat Jul 27, 2019 9:02 pm
jmx6 wrote:
Sat Jul 27, 2019 8:53 pm
I did the alternator on my MX6 and it was a radiator out job to give access - other than the extra work that entails it was pretty straightforward.
You're my friend justin....when are you free ? I've got an unknown spare from an Xedos in my shed .... :D
Summer holidays, so basically I’m free once I get back from holiday (this Wednesday). I have to work 14/15 and 21/22 August for results days but we should be able to find a time before then that works. Let me know what works for you.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Mon Jul 29, 2019 6:53 am

jmx6 wrote:
Sun Jul 28, 2019 8:00 pm
Incognito wrote:
Sat Jul 27, 2019 9:02 pm
jmx6 wrote:
Sat Jul 27, 2019 8:53 pm
I did the alternator on my MX6 and it was a radiator out job to give access - other than the extra work that entails it was pretty straightforward.
You're my friend justin....when are you free ? I've got an unknown spare from an Xedos in my shed .... :D
Summer holidays, so basically I’m free once I get back from holiday (this Wednesday). I have to work 14/15 and 21/22 August for results days but we should be able to find a time before then that works. Let me know what works for you.
Brilliant, many thanks Justin. Is this Thursday or Friday afternoon or over the weekend any good for you ? I've ordered a new belt that should arrive by Thursday. Cheers.

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: Breakdown

Post by jmx6 » Mon Jul 29, 2019 8:57 pm

Any of those times will work but on the afternoons I will be limited by needing to pick by daughter up from Branson - I need to check the exact times with her which I will be able to do when I get back.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Mon Jul 29, 2019 9:59 pm

jmx6 wrote:
Mon Jul 29, 2019 8:57 pm
Any of those times will work but on the afternoons I will be limited by needing to pick by daughter up from Branson - I need to check the exact times with her which I will be able to do when I get back.
Not a problem Justin , I'm totally flexible on those days and can work around you. Much appreciated mate just let me know 8-)

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Mon Jul 29, 2019 10:05 pm

mojo98 wrote:
Sat Jul 27, 2019 10:28 pm
Like Justin says, its a easy fix,, radiator out, But I did mine from below without managing to remove the radiator, Just remember to undo the locking nut on the belt system,
whole job should take less than 1 hour :D
Cheers Malc, much appreciated 8-)

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests