Breakdown

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Mon Jul 29, 2019 10:07 pm

cpt black wrote:
Sun Jul 28, 2019 9:19 am
Easy job Paul I always take the rad out hate working under cars ,gives a chance to
flush the rad out,wd40 the screw tensioner as well before slackening the pulley bolt
Thank you Kev, all a tad above my knowledge unfortunately but justin is on board to help out 8-)

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: Breakdown

Post by jmx6 » Tue Jul 30, 2019 9:45 am

Make sure you have a supply of coolant/antifreeze to refill and if you can spray some WD40 around the bolts in that area to,give it a few days to work in that would be good.

I assume you have a hosepipe to hand for flushing the rad.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Tue Jul 30, 2019 4:23 pm

jmx6 wrote:
Tue Jul 30, 2019 9:45 am
Make sure you have a supply of coolant/antifreeze to refill and if you can spray some WD40 around the bolts in that area to,give it a few days to work in that would be good.

I assume you have a hosepipe to hand for flushing the rad.
Most of the bolts are covered in oil from the previous front rocket gasket leaking :lol: but yes I'll sort that Hosepipe no problem, blue order ordered. Cheers.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Thu Aug 01, 2019 7:07 am

The belt has arrived, just waiting on antifreeze which is anticipated being delivered today or tomorrow. Justin my number is 07900930181 if texting is better for you. Cheers. 8-)

jmx6
Full Member
Posts: 357
Joined: Thu Sep 06, 2018 9:27 pm
Been thanked: 8 times

Re: Breakdown

Post by jmx6 » Thu Aug 01, 2019 3:15 pm

Shall we pencil in Saturday as the forecast is for reasonable weather. I could be over around 9-10 which will give plenty of time to get things done if that suits you.

Incognito
Full Member
Posts: 2217
Joined: Thu Sep 06, 2018 9:27 pm
Has thanked: 47 times
Been thanked: 18 times

Re: Breakdown

Post by Incognito » Thu Aug 01, 2019 7:57 pm

jmx6 wrote:
Thu Aug 01, 2019 3:15 pm
Shall we pencil in Saturday as the forecast is for reasonable weather. I could be over around 9-10 which will give plenty of time to get things done if that suits you.
No problem Justin many thanks. Antifreeze now here. I'll PM you address details , same village but my car is at my mums house.

Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests